Tem

0x007E·tem·pcb/TEM.kicad_pcb

Tem PCB layout, top view — open source board by 0x007E

About the Tem PCB

Tem is an open source PCB design by 0x007E, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 36 × 15 mm, with 14 components from 7 distinct parts.

Other key parts include the AT24CM02-SSHM. By type, the board carries 7 resistors, 3 capacitors, 2 ICs, 1 connector and 1 switch.

From the project

TWI/EEPROM Module

The TEM is a board with an AT24CM0X EEPROM or any other EEPROM that fits the pin setting of the board. The board itself is driven with a voltage from 3V3-5V. The EEPROM can be protected from being written with the onboard switch SW1.

The pcb is created with KiCAD, the housing with FreeCAD. All files are built with github actions so that they are ready for a production environment.

Tem, from the project README
From the project README

Main components on the Tem

Tem bill of materials (BOM)

14 components, 7 distinct parts.

QtyPartRefs
2
AT24CM02-SSHM
U1, U2
1
Conn_01x04_Pin
J1
1
SW_Wuerth_450301014042
SW1
1
10u
C1
2
100n
C2, C3
5
10k
R1, R2, R3, R6, R7
2
3k3
R4, R5

Tem design files

The KiCad project lives in the 0x007E/tem repository on GitHub; these links point at the commit this page was built from.

Tem: common questions

How big is the Tem PCB?

The Tem measures 36 × 15 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tem?

14 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tem design files?

From the 0x007E/tem repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Tem design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.