Fitra aaa
1hira-c·fitra-aaa
About the Fitra aaa PCB
Fitra aaa is an open source PCB design by 1hira-c, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 24 × 11 mm, with 21 components from 17 distinct parts.
Other key parts include the LSM6DSV and NPM2100-QEAA-R7. By type, the board carries 9 capacitors, 2 ICs, 2 connectors, 2 inductors, 1 module and 1 crystal.
From the project
Raytac AN54LQ-15(nRF54L15)搭載の SlimeVR(Smol Slime)トラッカー基板 / KiCad 設計
Raytac AN54LV-15(Nordic nRF54L15 搭載 BLE モジュール)を中心とした、 SlimeVR フルボディトラッカー基板(Smol Slime 向け)の KiCad 設計プロジェクトです。
本基板は、nRF 系 SoC 向けの SlimeVR トラッカー firmware「Smol Slime」で動作する トラッカーハードウェアです。
- Smol Slime ドキュメント: - トラッカー firmware(SlimeNRF): - SlimeVR プロジェクト:
- KiCad 9 以降(回路図は KiCad 10 で保存されています。KiCad 10 を推奨)
回路図・基板で使用しているシンボル/フットプリントは設計ファイル(.kicadsch の libsymbols および .kicadpcb)に埋め込まれているため、リポジトリをクローン すればそのまま閲覧・製造データ(ガーバー等)の生成が可能**です。外部ライブラリを 再ダウンロードしなくても基板は完全に表示されます。
Main components on the Fitra aaa
Fitra aaa bill of materials (BOM)
21 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LSM6DSV | XDCR_LSM6DSV16XTR | U2 |
| 1 | NPM2100-QEAA-R7 | QFN65P400X400X90-17N | U3 |
| 1 | AN54LV-15 | AN54LV-15 | M2 |
| 1 | CM8V-T1A-32.768KHZ-6PF-20PPM-TA-QC | XTAL_CM8V-T1A-32.768KHZ-6PF-20PPM-TA-QC | Y2 |
| 2 | Conn_01x01_Pin | Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork | J1, J2 |
| 1 | B3U-1000P Omron Electronics Inc-EMC Div | Switch_Tactile_SMD_B3U-1000P | S2 |
| 1 | ~ | SWD_Pad | ~1 |
| 1 | LED | LED_2-SMD_No_Lead_1.7x0.8mm | D1 |
| 1 | 2.2uH | L_0603_1608Metric | L1 |
| 1 | 4.7uH | L_0603_1608Metric | L2 |
| 2 | 10uF | C_0402_1005Metric | C1, C4 |
| 2 | 1nF | C_0201_0603Metric | C2, C5 |
| 1 | 2.2uF | C_0402_1005Metric | C3 |
| 1 | 4.7uF | C_0402_1005Metric | C6 |
| 2 | 100nF | C_0402_1005Metric | C7, C8 |
| 1 | 100uF | C_0805_2012Metric | C10 |
| 1 | R | R_0603_1608Metric | R1 |
Fitra aaa design files
The KiCad project lives in the 1hira-c/fitra-aaa repository on GitHub; these links point at the commit this page was built from.
- Layoutfitra-aaa.kicad_pcb
- Schematicfitra-aaa.kicad_sch
Fitra aaa: common questions
How big is the Fitra aaa PCB?
The Fitra aaa measures 24 × 11 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Fitra aaa?
21 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fitra aaa design files?
From the 1hira-c/fitra-aaa repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Fitra aaa design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which 1hira-c chose for the repository.