Kit-Trig-Sampler
About the Kit-Trig-Sampler PCB
Kit-Trig-Sampler is an open source PCB design by 4ms, published on GitHub. It is a 2-layer board measuring 78 × 109.2 mm, with 83 components from 21 distinct parts.
Other key parts include the TL072IP and AP7381-33V-A. By type, the board carries 34 resistors, 19 capacitors, 13 connectors, 3 ICs, 3 LEDs and 2 diodes.
Main components on the Kit-Trig-Sampler
Kit-Trig-Sampler bill of materials (BOM)
83 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TL072IP TL072_TH Texas Instruments | DIP-8pin_TH | U1, U2 |
| 1 | AP7381-33V-A Diodes Inc. | TO-92_Inline_Wide | U3 |
| 12 | WQP-WQP518MA 3.5mm_Mono_Switched Wenzhou QingPu Electronics Co | EighthInch_PJ398SM | J1, J2, J3, J4, J5, J6, J7, J8 +4 |
| 1 | 1-1002FBV0T Eurorack_Power_10pin_Unshrouded TAD | Pins_2x05_2.54mm_TH_Europower | J14 |
| 4 | SSW-105-01-T-D Socket_02x05_P2.54mm_TH Samtec | Socket_2x05_2.54mm_TH | JA1, JB1, JC1, JD1 |
| 3 | RV16AF-4A-15FW-B10k-3 16mm_NoDet_10k Alpha Taiwan | Pot_16mm_NoDet_RV16AF-4A | POT_LENGTH1, POT_SAMP1, POT_START1 |
| 1 | RV16AF-4A-15FW-B10k-3C 16mm_CtrDet_10k Alpha Taiwan | Pot_16mm_CtrDet_RV16AF-4A | POT_PITCH1 |
| 1 | PJS008U-3000-0 microSDCon_Vert_TH_PJS008U-3000 Yamaichi | CardSlot_MicroSD_YamaichiPJS008U-3000 | SD1 |
| 2 | TC002-N11AS2XWT-RGB Button_SPST_RGB_5.4mmCap Well Buying | Button_RgbLED_SPST_TC002 | Bank_But1, REV_BUT1 |
| 1 | PB615303HL-7 Button_SPST_RGB_7mmCap Run Run Enterprises | Button_RgbLED_SPST_PB615303HL-7mm | PLAY_BUT1 |
| 2 | SB140-E3/54 SB140-E3_TH Vishay | D_DO-35_P7.62mm_Horizontal | D1, D2 |
| 13 | K104Z15Y5VF53L2 0.1uF_Disc_TH Vishay | C_Disc_P2.54mm | C1, C2, C3, C7, C8, C9, C10, C12 +5 |
| 4 | ECA-1VM470I 47uF_16V_TH Panasonic | CP_Radial_P2.5mm | C4, C5, C19, C20 |
| 1 | QYX2A102KTP1FD 1nF_Disc_TH Nichicon | C_Disc_P5.08mm | C6 |
| 1 | D101K20Y5PL6TJ5R 100pF_Disc_TH Vishay | C_Disc_P5.08mm | C11 |
| 6 | 299-1k-RC 1k_TH0.125 Xicon | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R15, R16, R21, R40, R41 |
| 8 | 299-47k-RC 47k_TH0.125 Xicon | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R14, R17, R20, R27, R33 |
| 5 | 299-100k-RC 100k_TH0.125 Xicon | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7, R8, R34 |
| 5 | 299-10k-RC 10k_TH0.125 Xicon | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R12, R25, R26, R37 |
| 7 | 299-33k-RC 33k_TH0.125 Xicon | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11, R13, R28, R30, R31, R32 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 299-330-RC 330Ω_TH0.125 Xicon | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18, R19, R23 |
Kit-Trig-Sampler design files
The KiCad project lives in the 4ms/pcb-Kit-Trig-Sampler repository on GitHub; these links point at the commit this page was built from.
Kit-Trig-Sampler: common questions
How big is the Kit-Trig-Sampler PCB?
The Kit-Trig-Sampler measures 78 × 109.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kit-Trig-Sampler?
83 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kit-Trig-Sampler design files?
From the 4ms/pcb-Kit-Trig-Sampler repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kit-Trig-Sampler design in my own project?
The repository has no license, so all rights stay with 4ms. Use it as a reference, and ask the author before reusing the design.