Mini reef

aakashvishcoder·mini-reef

This repository ships a schematic but no board layout.

About the Mini reef PCB

Mini reef is an open source PCB design by aakashvishcoder, published on GitHub. It is a board, with 32 components from 15 distinct parts.

Other key parts include the TPS62130A. By type, the board carries 12 capacitors, 11 resistors, 3 ICs, 3 inductors, 1 connector and 1 fuse.

From the project

A low-cost 4-layer Artix-7 board that runs a small Reef-style accelerator against real HyperRAM, and measures bandwidth, latency and tokens per second. A CH32V307 board acts as the test host.

A low-cost 4-layer Artix-7 board that runs a small Reef-style accelerator against real HyperRAM, and measures bandwidth, latency and tokens per second. A CH32V307 board acts as the test host.

- FPGA: XC7A15T-FTG256 (footprint-compatible with XC7A35T) - Memory: Winbond W958D8NBYA5I, 256 Mb HyperRAM on a 1.8 V bank - USB-C: power, plus CH347T for USB-JTAG and console - Manufacturing: JLCPCB 4-layer, assembled

Main components on the Mini reef

Mini reef bill of materials (BOM)

32 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
TPS62130A
U1, U2, U3
1
USB_C_Receptacle_USB2.0_16P
J1
1
Polyfuse
F1
1
KT-0603R
LED
D1
3
2.2uH
L1, L2, L3
6
CL21A226MAQNNNE
22uF
C1, C4, C5, C8, C9, C12
3
CL05B104KO5NNNC
100nF
C2, C6, C10
3
CL05B103KB5NNNC
10nF
C3, C7, C11
3
0402WGF5101TCE
5.1k
R1, R2, R3
1
0402WGF2002TCE
20k
R4
2
0402WGF1003TCE
100k
R5, R6
2
0402WGF1502TCE
15k
R7, R10
1
0402WGF1202TCE
12k
R8
1
0402WGF4702TCE
47k
R9
1
0402WGF1001TCE
1k
R11

Mini reef design files

The KiCad project lives in the aakashvishcoder/mini-reef repository on GitHub; these links point at the commit this page was built from.

Mini reef: common questions

How many components are on the Mini reef?

32 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mini reef design files?

From the aakashvishcoder/mini-reef repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Mini reef design in my own project?

The repository has no license, so all rights stay with aakashvishcoder. Use it as a reference, and ask the author before reusing the design.