Access control devkitc relay
About the Access control devkitc relay PCB
Access control devkitc relay is an open source PCB design by aaronds, published on GitHub. It is a 2-layer board measuring 31.9 × 57.5 mm, with 19 components from 12 distinct parts.
By type, the board carries 2 diodes and 1 relay.
From the project
Access Control Manufacturing Artefacts
CAD / CAM assets for manufacturing access control boxes (aka "bleepy boxes").
Access control devkitc relay bill of materials (BOM)
19 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x04_Socket | JST_XA_B04B-XASK-1_1x04_P2.50mm_Vertical | CON_DAISY1 |
| 1 | Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | CON_MCU1 |
| 1 | Conn_01x02_Socket | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | CON_PWR1 |
| 1 | 1000uf | CP_Radial_D8.0mm_P5.00mm | C_5V_Large1 |
| 1 | C | CP_Axial_L10.0mm_D6.0mm_P15.00mm_Horizontal | C_SNUB1 |
| 2 | Conn_01x01_Socket | SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J_COIL_HIGH1, J_COIL_LOW1 |
| 7 | Conn_01x01_Socket | SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mm | J_NEUT1, J_NEUT2, J_NEUT3, J_RELAY_COM1, J_RELAY_LAMP1, J_RELAY_LAMP2, J_RELAY_NO1 |
| 1 | G5LE-1 | Relay_SPDT_Omron-G5LE-1 | K1 |
| 1 | Varistor | RV_Disc_D12mm_W3.9mm_P7.5mm | RV_SNUB1 |
| 1 | R | R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal | R_SNUB1 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | D_Zener | D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
Access control devkitc relay design files
The KiCad project lives in the aaronds/access-control-manufacture repository on GitHub; these links point at the commit this page was built from.
Access control devkitc relay: common questions
How big is the Access control devkitc relay PCB?
The Access control devkitc relay measures 31.9 × 57.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Access control devkitc relay?
19 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Access control devkitc relay design files?
From the aaronds/access-control-manufacture repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Access control devkitc relay design in my own project?
The repository has no license, so all rights stay with aaronds. Use it as a reference, and ask the author before reusing the design.
More boards in access-control-manufacture
ESP32Access control wroom-32e
71.3 × 65.5 mm41 parts2LNo license0
ESP32Access control smt lv
65.9 × 33.8 mm38 parts2LNo license0
ESP32Access control devkitc lv
50.1 × 65.5 mm31 parts2LNo license0
AVR/ArduinoAccess control door servo
52.6 × 22.1 mm26 parts2LNo license0
Bleep pannel
80.3 × 36.8 mm21 parts2LNo license0
Bleep pannel pcb minimal
46.5 × 32.3 mm20 parts2LNo license0
Bleep pannel pcb flip
84 × 40 mm19 parts2LNo license0
Current sensor
35 × 43.5 mm18 parts2LNo license0
Current sensor pcb min
35 × 39.1 mm13 parts2LNo license0
Contactor interface relay
41.2 × 34.9 mm13 parts2LNo license0
Access control smt psu
38.5 × 40.5 mm11 parts2LNo license0