Poly88 backplane rev e
About the Poly88 backplane rev e PCB
Poly88 backplane rev e is an open source PCB design by abzman, published on GitHub under the Unlicense license. It is a 2-layer board measuring 365.1 × 102.7 mm, with 33 components from 19 distinct parts.
By type, the board carries 13 connectors, 8 diodes, 7 resistors, 4 capacitors and 1 transistor.
From the project
replica PCBs including backplanes and interface cards
Poly88 backplane rev e bill of materials (BOM)
33 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2N5449 | TO-92_Wide | Q1 |
| 1 | Power In | 5 pin inline molex 0.93 | J1 |
| 1 | Switch and Light | Molex_KK-396_A-41791-0004_1x04_P3.96mm_Vertical | J2 |
| 4 | Conn_01x01 | Pin_D1.0mm_L10.0mm | J3, J11, J12, J13 |
| 1 | 346-100-520-802 Card Edge in | BUS_S100_M | J4 |
| 5 | 346-100-520-802 | 346100520802 | J5, J6, J7, J8, J9 |
| 1 | 346-100-520-802 edge mount connector | BUS_S100_M | J10 |
| 2 | 60S05 | D_DO-201AD_P18.83mm_Horizontal | D1, D2 |
| 5 | 1N4003 | D_DO-41_SOD81_P12.70mm_Horizontal | D3, D4, D5, D6, D8 |
| 1 | 1N4148 | D_DO-35_SOD27_P15.24mm_Horizontal | D7 |
| 1 | 2000uF | CP_Axial_L67.0mm_D26.0mm_P75.00mm_Horizontal | C1 |
| 1 | 1000uF | CP_Axial_L67.0mm_D23.0mm_P75.00mm_Horizontal | C2 |
| 1 | 17000uF | CP_Radial_D35.0mm_P12.90mm_SnapIn | C3 |
| 1 | 0.1uF | C_Rect_L11.0mm_W3.4mm_P10.00mm_MKT | C4 |
| 2 | 2.2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1, R2 |
| 1 | 330 | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R3 |
| 2 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 1 | 1K | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R6 |
| 1 | 470 | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R7 |
Poly88 backplane rev e design files
The KiCad project lives in the abzman/s100-PCBs repository on GitHub; these links point at the commit this page was built from.
Poly88 backplane rev e: common questions
How big is the Poly88 backplane rev e PCB?
The Poly88 backplane rev e measures 365.1 × 102.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Poly88 backplane rev e?
33 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Poly88 backplane rev e design files?
From the abzman/s100-PCBs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Poly88 backplane rev e design in my own project?
Yes, under the terms of its Unlicense license, which abzman chose for the repository.
