SwitchBoard
Acramonics·AllPassFilter·kicad_SwitchBoard/SwitchBoard.kicad_pcb
About the SwitchBoard PCB
SwitchBoard is an open source PCB design by Acramonics, published on GitHub. It is a 2-layer board measuring 48 × 37.6 mm, with 20 components from 8 distinct parts.
By type, the board carries 9 resistors, 6 capacitors, 3 connectors, 1 switch and 1 diode.
From the project
All Pass filter from Jake Rothman, Practical Electronics, June 2026
Circuit by Jake Rothman, Practical Electronics, June 2026
KiCad and PCB by Andrew Martin, acramonics, May 2026
This is a universal all-pass filter with 8 cascaded all-pass sections allowing a frequency-dependent phase shift.
See the April, May and June 2026 issues of Practical Electronics for details.
SwitchBoard bill of materials (BOM)
20 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x04_Pin | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x03_Pin | Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J3 |
| 1 | SW_4PDT_x4 | PushSwitch_4PDT_2x6Pin_P3.18x2.8 | SW1 |
| 1 | LED_Dual_Bidirectional | LED_D5.0mm | D1 |
| 6 | 47uF | CP_Radial_D5.0mm_P2.50mm | C1, C2, C3, C4, C5, C6 |
| 6 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R5, R6, R7 |
| 2 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R8 |
| 1 | 10K 0.6W | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R9 |
SwitchBoard design files
The KiCad project lives in the Acramonics/AllPassFilter repository on GitHub; these links point at the commit this page was built from.
SwitchBoard: common questions
How big is the SwitchBoard PCB?
The SwitchBoard measures 48 × 37.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SwitchBoard?
20 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the SwitchBoard design files?
From the Acramonics/AllPassFilter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SwitchBoard design in my own project?
The repository has no license, so all rights stay with Acramonics. Use it as a reference, and ask the author before reusing the design.