555-led badge
Acrop0liX·555-led-badge
About the 555-led badge PCB
555-led badge is an open source PCB design by Acrop0liX, published on GitHub. It is a 2-layer board measuring 80 × 60 mm, with 15 components from 13 distinct parts.
By type, the board carries 7 resistors, 2 diodes, 2 capacitors, 1 IC, 1 transistor and 1 battery holder.
It belongs with the wearables designs in this gallery.
From the project
Flashing dual-LED badge circuit made in KiCad 10
A flashing dual-LED badge circuit designed in KiCad 10 as a beginner PCB design project.
The ICM7555 CMOS timer runs in astable mode, generating a continuous oscillating signal. The output drives a 2N3904 NPN transistor which switches two red LEDs on and off alternately. Timing is controlled by resistors and capacitors connected to the threshold and trigger pins. The control voltage pin (pin 5) doesn't need a decoupling capacitor with the ICM7555, so it has been marked X.
555-led badge bill of materials (BOM)
15 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | DIP-8_W7.62mm | U1 |
| 1 | 2N3904 | TO-92_Inline | Q1 |
| 1 | Battery | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | EG1218 E-Switch | SW_Slide_SPDT_Straight_CK_OS102011MS2Q | S1 |
| 2 | RED | LED_D5.0mm | D1, D2 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 100uF | CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 68K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 22K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 2 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7 |
555-led badge design files
The KiCad project lives in the Acrop0liX/555-led-badge repository on GitHub; these links point at the commit this page was built from.
- Layout555_Badge.kicad_pcb
- Schematic555_Badge.kicad_sch
555-led badge: common questions
How big is the 555-led badge PCB?
The 555-led badge measures 80 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 555-led badge?
15 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the 555-led badge design files?
From the Acrop0liX/555-led-badge repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 555-led badge design in my own project?
The repository has no license, so all rights stay with Acrop0liX. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k