ТКП-1.37.A-1
About the ТКП-1.37.A-1 PCB
ТКП-1.37.A-1 is an open source PCB design by Adept666, published on GitHub. It is a 2-layer board measuring 58.4 × 81.3 mm, with 118 components from 78 distinct parts.
By type, the board carries 19 test points, 18 diodes, 11 inductors, 10 connectors, 3 crystals and 1 LED.
From the project
-ТТКРЧПДЛ-
Здесь хранятся схемы и чертежи гитарных педалек ТТКРЧПДЛ (штаб-квартира: Омск, Сибирь). Купить педальки или задать вопросы можно через группу ВКонтакте. Заценить звук можно на YouTube-канале.
Работа с исходными файлами осуществляется в программе KiCad.
Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов: KCL SBKCL
ТКП-1.37.A-1 bill of materials (BOM)
118 components, 78 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | COM | CON-PAD-S-1.0-1.9 | X1 |
| 2 | X | CON-PAD-S-1.0-1.9 | X2, X3 |
| 4 | X | R-SM-1206 | J1, J3, J4, J10 |
| 6 | 0 | R-SM-1206 | J2, J5, J6, J7, J8, J9 |
| 3 | 476 | CP-CTSMD-D | AL.C1, PS.C1, PS.C4 |
| 3 | 476 | CP-RADIAL-D05.0-P02.0-CLS | AL.C2, PS.C2, PS.C5 |
| 1 | 683 | R-SM-1206 | AL.R1 |
| 2 | X | R-SM-1206 | AL.R2, IB.J1 |
| 1 | 101 | R-SM-1206 | AL.R3 |
| 1 | 222 | R-SM-1206 | AL.R4 |
| 1 | 4148 | P-SOD-123-OR-DO-35-V2 | AL.VD1 |
| 1 | 3904 | P-SOT-23-B-E-C | AL.VT1 |
| 1 | X | CP-CTSMD-C | DWS.C1 |
| 1 | DWS.J1 | J-SB-0805-2 | DWS.J1 |
| 1 | DWS.J2 | J-SB-0805-2 | DWS.J2 |
| 1 | DWS.J3 | J-SB-0805-2 | DWS.J3 |
| 1 | DWS.J4 | J-SB-0805-2 | DWS.J4 |
| 3 | 0 | R-SM-1206 | DWS.R1, IB.J2, IB.J3 |
| 1 | 333 | R-SM-1206 | DWS.R2 |
| 4 | 104 | C-SM-1206 | IB.C1, OC.C1, OC.C2, PS.C3 |
Show 58 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 105 | R-SM-1206 | IB.R1 |
| 2 | 223 | R-SM-1206 | IB.R2, IB.R4 |
| 1 | 474 | R-SM-1206 | IB.R3 |
| 1 | 5532 | P-SO-08 | IL.D1 |
| 4 | 103 | R-SM-1206 | IND.R1, OC.R1, PS.R1, PS.R2 |
| 1 | OC.J1 | J-SB-0805-2 | OC.J1 |
| 1 | OC.J2 | J-SB-0805-2 | OC.J2 |
| 1 | OC.J3 | J-SB-0805-2 | OC.J3 |
| 1 | OC.J4 | J-SB-0805-2 | OC.J4 |
| 1 | OC.J5 | J-SB-0805-2 | OC.J5 |
| 1 | 104 | R-SM-1206 | OC.R2 |
| 1 | 78L05 | P-SO-08-OUT-GND-GND-NC-NC-GND-GND-IN | PS.D1 |
| 1 | C50K-C50K | RPB-1590N1-18-2x17-OR-2x1x17-1.6-PNL-7.4-2.8 | RPB1 |
| 2 | X | SW-MTS-102-A2-2.5 | SA1, SA2 |
| 1 | PBS-24-302SP | SW-PBS-24-302SP-2.5-PNL-13.0 | SB1 |
| 1 | COM | TP-6-1.0-1.9 | TP1 |
| 1 | V | TP-3-1.0-1.9 | TP2 |
| 1 | VA | TP-3-1.0-1.9 | TP3 |
| 1 | VREF | TP-3-1.0-1.9 | TP4 |
| 1 | IN | TP-2-1.0-1.9 | TP5 |
| 1 | IB-IN | TP-2-1.0-1.9 | TP6 |
| 1 | LFO-VREF | TP-1-1.0-1.9 | TP7 |
| 1 | LFO-B-IN | TP-2-1.0-1.9 | TP8 |
| 1 | LFO-B-OUT | TP-2-1.0-1.9 | TP9 |
| 1 | LFO-OUT | TP-1-1.0-1.9 | TP10 |
| 1 | IB-OUT | TP-3-1.0-1.9 | TP11 |
| 1 | DELAY-IN | TP-3-1.0-1.9 | TP12 |
| 1 | OC-IN1 | TP-2-1.0-1.9 | TP13 |
| 1 | DELAY-REF | TP-1-1.0-1.9 | TP14 |
| 1 | AL | TP-1-1.0-1.9 | TP15 |
| 1 | DELAY-OUT | TP-2-1.0-1.9 | TP16 |
| 1 | OC-IN2 | TP-2-1.0-1.9 | TP17 |
| 1 | OC-OUT | TP-2-1.0-1.9 | TP18 |
| 1 | OUT | TP-2-1.0-1.9 | TP19 |
| 1 | 1590N1 | 1590N1_A1 | VE1 |
| 3 | 1.0 | VFM-1.0-3.0-SL | VFM1, VFM2, VFM3 |
| 1 | BR-12.7 | VLS-BR | VLS1 |
| 2 | DI5M3x18 | VMH-STA-DA5-PNL-3.0 | VMH1, VMH3 |
| 1 | X | VMH-STA-DA5 | VMH2 |
| 1 | 1590N1 Connector Board | XB-1590N1 | XB1 |
| 1 | B4B-XH-A | CON-XH-B4B-A | XP1 |
| 1 | FYL-5013UWC | LED-ROUND-05.0-UNI-SH-SPACER-PNL-5.3 | HL1 |
| 1 | 105 | C-SM-1206 | D.C1 |
| 3 | 104 | C-SM-1206 | D.C2, D.C3, D.C10 |
| 3 | 332 | C-SM-1206 | D.C4, D.C8, D.C9 |
| 1 | 102 | C-SM-1206 | D.C5 |
| 2 | 103 | C-SM-1206 | D.C6, D.C7 |
| 1 | 8970 | P-SO-16-OR-SO-16W | D.D1 |
| 7 | 103 | R-SM-1206 | D.R1, D.R2, D.R3, D.R4, D.R5, D.R6, D.R7 |
| 1 | 103 | C-SM-1206 | L.C1 |
| 2 | 106 | CP-CTSMD-C | L.C2, L.C3 |
| 1 | 104 | R-SM-1206 | L.R1 |
| 1 | 473 | R-SM-1206 | L.R2 |
| 2 | 224 | R-SM-1206 | L.R3, L.R4 |
| 1 | 472 | R-SM-1206 | L.R5 |
| 1 | 0 | R-SM-1206 | L.R6 |
| 1 | 103 | R-SM-1206 | L.R7 |
| 1 | 3904 | P-SOT-23-B-E-C | L.VT1 |
ТКП-1.37.A-1 design files
The KiCad project lives in the Adept666/stompboxes repository on GitHub; these links point at the commit this page was built from.
ТКП-1.37.A-1: common questions
How big is the ТКП-1.37.A-1 PCB?
The ТКП-1.37.A-1 measures 58.4 × 81.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ТКП-1.37.A-1?
118 components, from 78 distinct parts. The full bill of materials is listed on this page.
Where can I download the ТКП-1.37.A-1 design files?
From the Adept666/stompboxes repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ТКП-1.37.A-1 design in my own project?
The repository has no license, so all rights stay with Adept666. Use it as a reference, and ask the author before reusing the design.
More boards in stompboxes
ТКП-1.23.B-1
86.4 × 111.8 mm214 parts2LNo license10
ТКП-1.23.A-1
86.4 × 111.8 mm160 parts2LNo license10
ТКП-1.38.A-2
58.4 × 81.3 mm122 parts2LNo license10
ТКП-1.38.A-1
58.4 × 81.3 mm121 parts2LNo license10
ТКП-1.37.A-3
58.4 × 81.3 mm118 parts2LNo license10
ТКП-1.37.A-2
58.4 × 81.3 mm118 parts2LNo license10
ТКП-1.36.A-4
58.4 × 109.2 mm94 parts2LNo license10