EDice
akaFunk·EDice·PCB/EDice.kicad_pcb
About the EDice PCB
EDice is an open source PCB design by akaFunk, published on GitHub. It is a 2-layer board measuring 65 × 30 mm, with 20 components from 7 distinct parts.
Other key parts include the PFS154-S16. By type, the board carries 7 diodes, 7 resistors, 2 connectors, 1 IC, 1 battery holder and 1 switch.
From the project
A very cheap electronic dice used for soldering exercises
The EDice is used as a simple soldering exercise. Therefore it has a combination of (relatively large) SMD and through-hole parts.
It is powered by a single CR2032 3V coin cell, which is on the back of the PCB. The holder we use is the BS-02-A1AJ010, which can also be purchased from LCSC for less than 5 Euro-Cents a pop.
Together with the PCB and a few other components, the whole cost is approximately 1€ in quantaties of about 100. This includes everything except the prommer (PCB, components, 3D case, shipping), which makes it ideal for a give-away item.

Main components on the EDice
EDice bill of materials (BOM)
20 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PFS154-S16 PADAUK Tech | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 2 | 12251140CNG0S115001 Conn_01x04 JILN | PinHeader_1x04_P2.54mm_Vertical | J2, J3 |
| 1 | BS-02-A1AJ010 Battery_Cell MYOUNG | BS-02-A1AJ010 | BT1 |
| 1 | K2-1102DP-J4SW-04 SW_Push Korean Hroparts Elec | K2-1102SP-J4SC-04 | SW1 |
| 7 | XL-502SURD LED XINGLIGHT | LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7 |
| 1 | CC1H104ZC1FD3F5O1100 100n Dersonic | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 7 | MFR0W8F2201A50 1k UNI-ROYAL(Uniroyal Elec) | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
EDice design files
The KiCad project lives in the akaFunk/EDice repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/EDice.kicad_pcb
- SchematicPCB/EDice.kicad_sch
EDice: common questions
How big is the EDice PCB?
The EDice measures 65 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EDice?
20 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the EDice design files?
From the akaFunk/EDice repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the EDice design in my own project?
The repository has no license, so all rights stay with akaFunk. Use it as a reference, and ask the author before reusing the design.