CAN Sensor

Alexandr-Filatov·CAN_Sensor_PCB

CAN Sensor PCB layout, top view — open source STM32 board by Alexandr-Filatov

About the CAN Sensor PCB

CAN Sensor is an open source STM32 PCB design by Alexandr-Filatov, published on GitHub. It is a 2-layer board measuring 59 × 32.5 mm, with 63 components from 25 distinct parts.

Its main chip is the LQFP-64_10x10mm_P0.5mm, from the STM32 family. By type, the board carries 28 capacitors, 18 resistors, 7 diodes, 5 connectors, 3 ICs and 1 crystal.

It belongs with the sensors designs in this gallery.

CAN Sensor bill of materials (BOM)

63 components, 25 distinct parts.

QtyPartRefs
1
~
U1
1
~
U2
1
~
U5
1
~
Y1
2
~
J1, J3
1
~
J2
2
~
J4, J5
1
~
D1
1
~
D2
1
~
D3
3
~
D4, D6, D7
1
~
D5
1
47u
L1
9
100n
C1, C2, C8, C9, C12, C13, C22, C26 +1
7
56p
C3, C4, C10, C24, C25, C28, C29
2
30p
C5, C11
3
1u
C6, C7, C15
1
4.7u
C14
3
10u
C16, C17, C18
1
100u
C19
Show 5 more
QtyPartRefs
2
2.2u
C20, C21
12
1k
R1, R2, R5, R6, R8, R10, R11, R12 +4
3
120
R3, R13, R14
1
750
R4
2
160
R7, R9

CAN Sensor design files

The KiCad project lives in the Alexandr-Filatov/CAN_Sensor_PCB repository on GitHub; these links point at the commit this page was built from.

CAN Sensor: common questions

What microcontroller does the CAN Sensor use?

The CAN Sensor is built around the LQFP-64_10x10mm_P0.5mm, from the STM32 family.

How big is the CAN Sensor PCB?

The CAN Sensor measures 59 × 32.5 mm, has 2 copper layers and is 1.5 mm thick.

How many components are on the CAN Sensor?

63 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the CAN Sensor design files?

From the Alexandr-Filatov/CAN_Sensor_PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CAN Sensor design in my own project?

The repository has no license, so all rights stay with Alexandr-Filatov. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CAN Sensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards