STM32F722
Alexandr-Filatov·STM32F722
About the STM32F722 PCB
STM32F722 is an open source STM32 PCB design by Alexandr-Filatov, published on GitHub. It is a 2-layer board measuring 87.6 × 66.7 mm, with 68 components from 31 distinct parts.
Its main chip is the STM32F722, from the STM32 family. Other key parts include the TLV431 and LD3985G122R_TSOT23. By type, the board carries 19 capacitors, 19 resistors, 14 connectors, 7 diodes, 3 ICs and 3 switches.
Main components on the STM32F722
STM32F722 bill of materials (BOM)
68 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV431 | SOT-23-5 | U1 |
| 1 | LD3985G122R_TSOT23 | TSOT-23-5 | U2 |
| 1 | STM32F722 | LQFP-64_10x10mm_Pitch0.5mm | U3 |
| 1 | BC847 | SOT-23 | Q1 |
| 1 | BC808 | SOT-23 | Q2 |
| 1 | Crystal | Oscillator_SMD_Fordahl_DFAS15-4pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | Conn_01x04 | Conn_01x04 | J1 |
| 5 | TEST_1P | TestPin | J2, J5, J6, J7, J8 |
| 1 | Conn_02x10_Odd_Even | IDC-20MS | J3 |
| 1 | Conn_02x10_Odd_Even | Conn_02x10 | J4 |
| 3 | Conn_02x05_Odd_Even | IDC-10MS | J9, J11, J12 |
| 1 | Conn_02x06_Odd_Even | Conn_02x06 | J10 |
| 2 | Conn_01x03 | Conn_01x03 | J13, J14 |
| 3 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3 |
| 2 | D | D_SOD-323_HandSoldering | D1, D2 |
| 5 | LED | LED_0805_HandSoldering | D3, D4, D5, D6, D7 |
| 11 | 100n | C_0805_HandSoldering | C1, C2, C3, C4, C6, C7, C8, C9 +3 |
| 3 | 1u | C_0805_HandSoldering | C5, C14, C16 |
| 2 | 4.7u | C_0805_HandSoldering | C11, C15 |
| 1 | 10n | C_0805_HandSoldering | C12 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 20p | C_0805_HandSoldering | C18, C19 |
| 2 | 330 | R_0805_HandSoldering | R1, R8 |
| 6 | 3k | R_0805_HandSoldering | R2, R12, R13, R14, R15, R16 |
| 2 | 1k | R_0805_HandSoldering | R3, R17 |
| 1 | 5.1k | R_0805_HandSoldering | R4 |
| 2 | 100 | R_0805_HandSoldering | R5, R9 |
| 2 | 220k | R_0805_HandSoldering | R6, R10 |
| 1 | 100k | R_0805_HandSoldering | R7 |
| 1 | R | R_0805_HandSoldering | R11 |
| 1 | 500 | R_0805_HandSoldering | R18 |
| 1 | 2k | R_0805_HandSoldering | R19 |
STM32F722 design files
The KiCad project lives in the Alexandr-Filatov/STM32F722 repository on GitHub; these links point at the commit this page was built from.
- LayoutSTM32F722.kicad_pcb
STM32F722: common questions
What microcontroller does the STM32F722 use?
The STM32F722 is built around the STM32F722, from the STM32 family.
How big is the STM32F722 PCB?
The STM32F722 measures 87.6 × 66.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32F722?
68 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32F722 design files?
From the Alexandr-Filatov/STM32F722 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STM32F722 design in my own project?
The repository has no license, so all rights stay with Alexandr-Filatov. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F722 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k