Pixel interface v3
allanschwartz·yahrzeit·Hardware/pixel_interface_v3/pixel_interface_v3.kicad_pcb
About the Pixel interface v3 PCB
Pixel interface v3 is an open source PCB design by allanschwartz, published on GitHub. It is a 2-layer board measuring 33.6 × 53.3 mm, with 7 components from 7 distinct parts.
By type, the board carries 5 connectors, 1 diode and 1 resistor.
From the project
Yahrzeit Wall server and embedded code
This directory contains the electrical and mechanical design files for the Yahrzeit Wall controller, interface board, pixel boards, test fixtures, and enclosures.
The current controller uses an Arduino Uno R4, an Arduino-compatible Ethernet shield, and the Yahrzeit Controller Pixel Interface V3 board. The interface board connects the controller stack to the installed chain of YYZ Pixel boards.

Pixel interface v3 bill of materials (BOM)
7 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | POWER | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | D10_D9_D8 | PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | YYZ_PIXEL | PinHeader_2x05_P2.54mm_Horizontal | J5 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | RM06F1001CT 1K | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
Pixel interface v3 design files
The KiCad project lives in the allanschwartz/yahrzeit repository on GitHub; these links point at the commit this page was built from.
Pixel interface v3: common questions
How big is the Pixel interface v3 PCB?
The Pixel interface v3 measures 33.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pixel interface v3?
7 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pixel interface v3 design files?
From the allanschwartz/yahrzeit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pixel interface v3 design in my own project?
The repository has no license, so all rights stay with allanschwartz. Use it as a reference, and ask the author before reusing the design.