Encoder
AmeyDEWan·semester-project-PEM-tiny-car·Hardware/Encoder/encoder/encoder.kicad_pcb
About the Encoder PCB
Encoder is an open source PCB design by AmeyDEWan, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 5 components from 5 distinct parts.
By type, the board carries 3 connectors and 2 resistors.
From the project
This repository contains the design files and documentation for the PEM2 SoSe25 model car project.
This repository contains the design files and documentation for the PEM2 SoSe25 model car project.
Please refer to the individual README files for more specific information about each subsystem.
- Designing and 3D modeling of the car body: Christian Eyring - Assembling the car body: Christian Eyring, Yulien Fang - Designing the steering mechanism: Tim Riede
- PCB design: Yulien Fang, Christian Eyring - PCB soldering: Yulien Fang, Christian Eyring - PCB circuit testing: Yulien Fang, Christian Eyring - Sensor testing: Christian Eyring
Encoder bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X06_PIN Conn_01x03_Pin | PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P Conn_01x01_Pin | PinSocket_1x01_P2.54mm_Vertical | J2 |
| 1 | CONN_01X06_PIN Conn_01x01_Pin | PinSocket_1x01_P2.54mm_Vertical | J3 |
| 1 | 499 R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
Encoder design files
The KiCad project lives in the AmeyDEWan/semester-project-PEM-tiny-car repository on GitHub; these links point at the commit this page was built from.
Encoder: common questions
How big is the Encoder PCB?
The Encoder measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Encoder?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Encoder design files?
From the AmeyDEWan/semester-project-PEM-tiny-car repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Encoder design in my own project?
The repository has no license, so all rights stay with AmeyDEWan. Use it as a reference, and ask the author before reusing the design.