Spool Reader

amnonliu·Spool_Reader·hardware/kicad/reader-r2.kicad_pcb

Spool Reader PCB layout, top view — open source board by amnonliu

About the Spool Reader PCB

Spool Reader is an open source PCB design by amnonliu, published on GitHub under the Custom license license. It is a 2-layer board measuring 60 × 46 mm, with 8 components from 7 distinct parts.

By type, the board carries 4 connectors, 3 capacitors and 1 switch.

It belongs with the iot & wireless designs in this gallery.

From the project

Experimental DIY RFID spool reader designed for Bambu Lab H2C printers. Maps spool tags to filament profiles and sends saved settings over the local network. Includes firmware, PCB designs and a printable enclosure.

A local RFID spool reader by Amnon Silverstein, built around a Seeed Studio XIAO ESP32-S3, PN5180 NFC module and 0.96-inch SSD1306 OLED. It identifies tags, keeps a local spool catalog, and can use a Bambu printer’s local MQTT interface to learn and apply filament metadata when a spool is loaded into an AMS.

0.2.0-rc5 — optional scan buzzer, idle-page QR, print status and remembered browser login. The author fitted a buzzer diagonally across the unused SW1 button holes and reports loud, clear operation. The updated manual covers these features and the eight-character minimum administrator…

Spool Reader, from the project README
From the project README

Spool Reader bill of materials (BOM)

8 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO left D0-D6
J1
1
XIAO right 5V-D7
J2
1
PN5180
J3
1
OLED 3V3
J4
1
READ
SW1
1
10uF 16V
C1
2
100nF
C2, C3

Spool Reader design files

The KiCad project lives in the amnonliu/Spool_Reader repository on GitHub; these links point at the commit this page was built from.

Spool Reader: common questions

How big is the Spool Reader PCB?

The Spool Reader measures 60 × 46 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Spool Reader?

8 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Spool Reader design files?

From the amnonliu/Spool_Reader repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Spool Reader design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Similar boards