LED-Status x3
About the LED-Status x3 PCB
LED-Status x3 is an open source PCB design by AnotherMike-exe, published on GitHub under the MIT license. It is a 4-layer board measuring 14 × 11 mm, with 6 components from 5 distinct parts.
By type, the board carries 3 diodes and 3 resistors.
From the project
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs
Reusable PCB layout blocks for Plum Solutions boards. Nine schematic design blocks exist. Each one gets a matching layout so a host project can drop in the parts, the routing and the copper pours already proven on a reference board.
The fragment lives outside this repository, in the shared library on the Plum volume. See docs/ARCHITECTURE.md.
PoE-PD-Si3402-Class1 is retired. PoE always arrives on an Ethernet cable, so a PoE block with no jack was never a drop-in part.
LED-Status x3 bill of materials (BOM)
6 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 150060VS75000 Green 570nm 0603 Wurth Elektronik | LED_0603_1608Metric | D1 |
| 1 | 150060AS75000 Amber 605nm 0603 Wurth Elektronik | LED_0603_1608Metric | D2 |
| 1 | 150060RS75000 Red 625nm 0603 Wurth Elektronik | LED_0603_1608Metric | D3 |
| 1 | RC0603FR-07220RL 220 Yageo | R_0603_1608Metric | R4 |
| 2 | RC0603FR-07330RL 330R Yageo | R_0603_1608Metric | R5, R6 |
LED-Status x3 design files
The KiCad project lives in the AnotherMike-exe/KiCadBlocks repository on GitHub; these links point at the commit this page was built from.
LED-Status x3: common questions
How big is the LED-Status x3 PCB?
The LED-Status x3 measures 14 × 11 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the LED-Status x3?
6 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the LED-Status x3 design files?
From the AnotherMike-exe/KiCadBlocks repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LED-Status x3 design in my own project?
Yes, under the terms of its MIT license, which AnotherMike-exe chose for the repository.
More boards in KiCadBlocks
BlockBuilder
1 × 18.3 mm79 parts4LMIT0
PoE-Ethernet-Si3402-W5500
56 × 84 mm79 parts4LMIT0- schematic only · 42 parts
PoE-PD-Si3402-Class1
42 parts4LMIT0 
Ethernet-W5500-Magjack
42 × 55 mm37 parts4LMIT0
RF-CC1101-433
25 × 30 mm25 parts4LMIT0
PowerMux-TPS2121
15 × 20 mm13 parts4LMIT0
Buck-5V-3V3-TPS563208
18 × 20 mm11 parts4LMIT0
ESP32MCU-ESP32S3-MINI
27 × 24 mm11 parts4LMIT0
USBC-Device-ESD
20 × 21 mm4 parts4LMIT0
LDO-RF-3V3-AP2112K
10 × 12 mm3 parts4LMIT0