Monitor

anton-pt·hwdevsbx·reference/challenge-03-expanded-v1/workspace/hardware/monitor.kicad_pcb

Monitor PCB layout, top view — open source board by anton-pt

About the Monitor PCB

Monitor is an open source PCB design by anton-pt, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 50 mm, with 43 components from 16 distinct parts.

Other key parts include the ADS7924 (0x48), TCA9548A (0x70), TCA9535 (0x20), TPS22975DSGR bank0 and TPS22975DSGR bank1. By type, the board carries 17 resistors, 16 capacitors, 6 ICs and 4 connectors.

From the project

RealityCheck: executable hardware design sandboxes, peripheral emulators and an unsaturated benchmark for hardware agents

Editable43-part,70×50 mm two-layer reference for the public proposed Challenge03 profile. All parts are priced; provisional total13.05 credits. Both ADS7924s use0x48 through actual TCA9548A branches. TCA9535 drives supply enables through external pull-down nets; mux RESET reaches the carrier independently of I²C.

J4 provides independent bank feeds. Each switch has5 V bias,20 µF nominal input capacitance, three1 µF bank capacitors (including separate AVDD/DVDD bypass), local I²C/reset pulls and a10 kΩ bleeder. MUXOUT feeds ADCIN through100 Ω with1 nF C0G to ground. TI-recommended copper lands…

Main components on the Monitor

ADS7924 (0x48)TCA9548A (0x70)TCA9535 (0x20)TPS22975DSGR bank0TPS22975DSGR bank1

Monitor bill of materials (BOM)

43 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
ADS7924 (0x48)
U1, U2
1
TCA9548A (0x70)
U3
1
TCA9535 (0x20)
U4
1
TPS22975DSGR bank0
U5
1
TPS22975DSGR bank1
U6
1
Carrier / status fixture
J1
1
Bank 0 scaled sensors
J2
1
Bank 1 scaled sensors
J3
1
Fixed independent bank-feed fixture
J4
4
100N
100n
C1, C2, C13, C16
2
1n
C3, C7
6
1u
C4, C5, C6, C8, C9, C10
4
10U
10u
C11, C12, C14, C15
6
2.2K
2.2k
R1, R2, R8, R9, R13, R14
9
10K
10k
R3, R4, R5, R6, R7, R10, R12, R15 +1
2
100
R11, R16

Monitor design files

The KiCad project lives in the anton-pt/hwdevsbx repository on GitHub; these links point at the commit this page was built from.

Monitor: common questions

How big is the Monitor PCB?

The Monitor measures 70 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Monitor?

43 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Monitor design files?

From the anton-pt/hwdevsbx repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Monitor design in my own project?

Yes, under the terms of its MIT license, which anton-pt chose for the repository.

More boards in hwdevsbx