CTRL Z
Astronuat21·4DS·CTRL_Z/CTRL_Z.kicad_pcb
About the CTRL Z PCB
CTRL Z is an open source PCB design by Astronuat21, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 25 × 20 mm, with 7 components from 3 distinct parts.
By type, the board carries 4 diodes, 2 switches and 1 connector.
From the project
An unnofficial succesor to the Nintendo 3DS.
Hallo! Welcome to the Github Repository for the 4DS.
4DS is a solo project by Astronuat21 (me!!) aiming to make a dual screen console akin to the Nintendo DS's but with stronger hardware, better battery life and specs in general. The device is also much larger than the ones you might have at home; coming in at around 19x11.5x3cm, the device is better suited for people with bigger hands who may find uncomfortability using even the stardard XL models. The hardware mostly tops the Switch, using the Lattepanda Mu SoC and it's N100 CPU, alongside 16GB of RAM and expandable Gen 3 SSD storage. If…
CTRL Z bill of materials (BOM)
7 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 503480-0440 MOLEX | 5034800440 | J2 |
| 2 | B3S-1002 OMRON | B3S1002 | S1, S2 |
| 4 | ESD5V0B03-1006 ESD5V0B03 TECH PUBLIC | D_0402_1005Metric | D22, D23, D24, D25 |
CTRL Z design files
The KiCad project lives in the Astronuat21/4DS repository on GitHub; these links point at the commit this page was built from.
- LayoutCTRL_Z/CTRL_Z.kicad_pcb
- SchematicCTRL_Z/CTRL_Z.kicad_sch
- BOMCTRL_Z/CTRL_Z_BOM.csv
CTRL Z: common questions
How big is the CTRL Z PCB?
The CTRL Z measures 25 × 20 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CTRL Z?
7 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CTRL Z design files?
From the Astronuat21/4DS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CTRL Z design in my own project?
Yes, under the terms of its AGPL-3.0 license, which Astronuat21 chose for the repository.