Extrude
atireksd11·extrude·tests/fixtures/phase2/clean/board.kicad_sch
About the Extrude PCB
Extrude is an open source PCB design by atireksd11, published on GitHub. It is a board, with 1 components from 1 distinct parts.
Other key parts include the Output.
From the project
These tiny KiCad projects are generated by buildfixture.py. They use a self-contained one-pin symbol and footprint, with stable UUIDs. No library, network, model, or project code is needed. clean has a no-connect marker; broken removes it, changes the footprint value, and adds cr
These tiny KiCad projects are generated by buildfixture.py. They use a self-contained one-pin symbol and footprint, with stable UUIDs. No library, network, model, or project code is needed. clean has a no-connect marker; broken removes it, changes the footprint value, and adds crossing tracks on different nets. routing` adds only the crossing tracks. This is controlled checker evidence, not a manufacturable circuit.
Main components on the Extrude
Extrude bill of materials (BOM)
1 components, 1 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Output | Output | U1 |
Extrude design files
The KiCad project lives in the atireksd11/extrude repository on GitHub; these links point at the commit this page was built from.
Extrude: common questions
How many components are on the Extrude?
1 components, from 1 distinct parts. The full bill of materials is listed on this page.
Where can I download the Extrude design files?
From the atireksd11/extrude repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.
Can I use the Extrude design in my own project?
The repository has no license, so all rights stay with atireksd11. Use it as a reference, and ask the author before reusing the design.