Host full
About the Host full PCB
Host full is an open source PCB design by azonenberg, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 117 × 129.5 mm, with 198 components from 32 distinct parts.
Other key parts include the KSZ9031RNX, ECS-1612MV-250-CN-TR and SC185EUL. By type, the board carries 89 capacitors, 54 resistors, 31 connectors, 11 inductors, 7 ICs and 3 switches.
From the project
STM32F7 + Artix-7 SoM
Main components on the Host full
Host full bill of materials (BOM)
198 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | KSZ9031RNX | QFN_48_0.5MM_7x7MM | U1, U2, U5 |
| 3 | ECS-1612MV-250-CN-TR | OSCILLATOR_1.6x1.2 | U3, U4, U6 |
| 1 | SC185EUL | QFN_16_0.5MM_3x3MM | U7 |
| 1 | CONN_INTEGRALSTICK_MCU_HOST | CONN_SAMTEC_QSH-060-01-L-D-A | J1 |
| 1 | CONN_INTEGRALSTICK_FPGA_HOST | CONN_SAMTEC_QSH-060-01-L-D-A | J2 |
| 4 | 0826-1G1T-23-F | CONN_BELFUSE_0826_1G1T_23_F | J3, J4, J5, J6 |
| 9 | PMOD_HOST | CONN_HEADER_2.54MM_2x6_RA_PMOD_HOST | J7, J8, J9, J10, J11, J12, J13, J14 +1 |
| 1 | XILINX_JTAG | XILINX_JTAG_PTH_MOLEX_0878311420 | J15 |
| 6 | SMA | CONN_SMA_EDGE_SAMTEC_SMA_J_P_H_ST_EM1 | J16, J17, J18, J19, J20, J21 |
| 6 | TESTPAD | TESTPOINT_SMT_0.5MM | J22, J24, J25, J26, J27, J28 |
| 3 | TESTCLIP | TESTPOINT_SMT_KEYSTONE_5016 | J29, J30, J31 |
| 1 | 2A | EIA_0603_RES_NOSILK | F1 |
| 1 | CONN_3_PWROUT | CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | K1 |
| 3 | SW_SPST | SWITCH_RAFI_MICON_5 | SW1, SW2, SW3 |
| 1 | GREEN | EIA_0603_LED | D1 |
| 9 | 600R @ 100 MHz | EIA_0402_CAP_NOSILK | L1, L2, L3, L4, L5, L6, L8, L9 +1 |
| 1 | BLM31KN271SH1L | EIA_1206_CAP_NOSILK | L7 |
| 1 | NRS5030T1R0NMGJ | INDUCTOR_YUDEN_NRS5030 | L11 |
| 21 | 4.7 uF | EIA_0603_CAP_NOSILK | C1, C2, C3, C4, C5, C6, C7, C8 +13 |
| 43 | 0.47 uF | EIA_0402_CAP_NOSILK | C10, C12, C14, C16, C17, C18, C19, C20 +35 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 21 | 0.1 uF | EIA_0402_CAP_NOSILK | C55, C56, C57, C58, C59, C60, C61, C62 +13 |
| 2 | 47 uF | EIA_1210_CAP_NOSILK | C75, C88 |
| 1 | 4.7 nF | EIA_0603_CAP_NOSILK | C86 |
| 1 | 22 uF | EIA_1210_CAP_NOSILK | C87 |
| 9 | 1K | EIA_0402_RES_NOSILK | R1, R10, R19, R20, R23, R24, R25, R34 +1 |
| 21 | 33 | EIA_0402_RES_NOSILK | R2, R3, R4, R5, R6, R7, R11, R12 +13 |
| 4 | 10K | EIA_0402_RES_NOSILK | R8, R17, R32, R53 |
| 3 | 12.1K 1% | EIA_0402_RES_NOSILK | R9, R18, R33 |
| 9 | 270 | EIA_0402_RES_NOSILK | R37, R38, R39, R40, R41, R42, R43, R44 +1 |
| 4 | 1M | EIA_0402_RES_NOSILK | R45, R46, R47, R48 |
| 3 | DNP | EIA_0402_RES_NOSILK | R49, R50, R51 |
| 1 | 1 | EIA_0402_RES_NOSILK | R54 |
Host full design files
The KiCad project lives in the azonenberg/integralstick repository on GitHub; these links point at the commit this page was built from.
Host full: common questions
How big is the Host full PCB?
The Host full measures 117 × 129.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Host full?
198 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Host full design files?
From the azonenberg/integralstick repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Host full design in my own project?
Yes, under the terms of its BSD-3-Clause license, which azonenberg chose for the repository.
