Ioboard

B0rgar·TH-555-VCO

Ioboard PCB layout, top view — open source board by B0rgar

About the Ioboard PCB

Ioboard is an open source PCB design by B0rgar, published on GitHub. It is a 2-layer board measuring 48.3 × 108 mm, with 41 components from 15 distinct parts.

Other key parts include the TL431DBZ. By type, the board carries 16 resistors, 3 jumpers, 2 ICs and 1 capacitor.

From the project

Thomas henry vco from gerbster.nl

Thomas henry 555 vco with panel. based on Eagleproject from Gerbster.nl.

imported to kicad. IO board redesigned for thonkicons jacks and wider spacing. coarse pot replaced with 8 way octave switch, smd resistors and tl431 underneath the rotary switch. panel made.

PCBS ordered from JLCPCB. will update after building and testing. Looking at how the soldermask layer is overlapping the silkscreen on the pics from JLC, I suspect I made a mistake and somehow didnt save the edited version of the panel. time will tell.

Ioboard, from the project README
From the project README

Main components on the Ioboard

Ioboard bill of materials (BOM)

41 components, 15 distinct parts.

QtyPartRefs
1
~
U1
1
TL431DBZ
U3
4
—
@HOLE0, @HOLE1, @HOLE2, @HOLE3
9
PJ301BMPJ301BM
CV0, LIN-FM-IN0, PULSE0, PWM-MOD-IN0, RAMP0, SINE0, SYNC0, TRIANGLE0 +1
5
100k
EXP-FM-ATTN0, FINE0, INIT-PWM0, LIN-FM-ATTN0, PWM-MOD-ATTN0
1
PINHD-1X6
JP2
2
PINHD-1X3
JP3, JP4
1
R_10k_Trim
RV2
1
.22uf
C1
3
100k
R1, R3, R4
1
2.2M
R2
8
1k
R5, R6, R7, R8, R9, R10, R11, R12
1
1k2
R13
2
DNP
R14, R15
1
330k
R16

Ioboard design files

The KiCad project lives in the B0rgar/TH-555-VCO repository on GitHub; these links point at the commit this page was built from.

Ioboard: common questions

How big is the Ioboard PCB?

The Ioboard measures 48.3 × 108 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ioboard?

41 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ioboard design files?

From the B0rgar/TH-555-VCO repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Ioboard design in my own project?

The repository has no license, so all rights stay with B0rgar. Use it as a reference, and ask the author before reusing the design.

More boards in TH-555-VCO