HardLabs

FlightControlUnitBoard

b1uN7·DEFCON-26-Flying-Skull-Badge·FlightControlUnitBoard V3/KiCADv5/FlightControlUnitBoard.kicad_pcb

FlightControlUnitBoard PCB layout, top view — open source board by b1uN7

About the FlightControlUnitBoard PCB

FlightControlUnitBoard is an open source PCB design by b1uN7, published on GitHub. It is a 2-layer board measuring 74.3 × 74.9 mm, with 19 components from 8 distinct parts.

By type, the board carries 11 connectors, 4 LEDs and 4 resistors.

It belongs with the wearables designs in this gallery.

From the project

DEFCON 26 Flying Skull Badge

Let's wotk together for DEFCON 29 (2021)!! I have set up a new Slack fir us to prepare: https://join.slack.com/t/flyingbadgers/sharedinvite/zt-rhldgde9-1GLsEr0Yzdh6VICE2oVjuQ__

/------------------------------------------------------------------------------------------------\\

/------------------------------------------------------------------------------------------------\\

FlightControlUnitBoard bill of materials (BOM)

19 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CONN_02X05_ODD_EVEN
Conn_02x05_Odd_Even
J1
5
CONN_01X02_MALE
Conn_01x02_Male
J2, J3, J4, J5, J6
3
CONN_02X01
Conn_02x01
J7, J8, J9
2
CONN_02X01
Pin_Header_Straight_1x02
J10, J11
2
GREEN
LED1, LED4
2
RED
LED2, LED3
2
33
R1, R4
2
47
R2, R3

FlightControlUnitBoard design files

The KiCad project lives in the b1uN7/DEFCON-26-Flying-Skull-Badge repository on GitHub; these links point at the commit this page was built from.

FlightControlUnitBoard: common questions

How big is the FlightControlUnitBoard PCB?

The FlightControlUnitBoard measures 74.3 × 74.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FlightControlUnitBoard?

19 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FlightControlUnitBoard design files?

From the b1uN7/DEFCON-26-Flying-Skull-Badge repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the FlightControlUnitBoard design in my own project?

The repository has no license, so all rights stay with b1uN7. Use it as a reference, and ask the author before reusing the design.

More boards in DEFCON-26-Flying-Skull-Badge

Similar boards