Channel Two v2
bassistTech·ChannelTwoPreamp·KiCad project/Channel Two v2/Channel Two v2.kicad_pcb
About the Channel Two v2 PCB
Channel Two v2 is an open source PCB design by bassistTech, published on GitHub under the MIT license. It is a 2-layer board measuring 84.3 × 24.1 mm, with 54 components from 29 distinct parts.
Other key parts include the OPA1654. By type, the board carries 25 resistors, 16 capacitors, 4 connectors, 2 ICs, 2 diodes and 1 transistor.
From the project
Design of compact bass preamp for adding second input to an amp.
Compact bass preamp for adding second input to an existing amplifier
Here's the main design article for version 1.
This repository is my entire project folder so there are a lot of extraneous files. I've listed the most important ones here.
.\Modeling\Channel Two model circuit v1.asc = LTSpice modeling circuit
.\Docs\Build journal - v1.pdf = Build notes for version 1

Main components on the Channel Two v2
Channel Two v2 bill of materials (BOM)
54 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | OPA1654 | TSSOP-14_4.4x5mm_P0.65mm | U1, U2 |
| 1 | DMP2305U-7 DMP4065S-7 | TSOT-23_HandSoldering | Q1 |
| 1 | Aux Input | PinHeader_1x02_P2.00mm_Vertical | J1 |
| 1 | Main Input | PinHeader_1x02_P2.00mm_Vertical | J2 |
| 1 | Out | PinHeader_1x02_P2.00mm_Vertical | J3 |
| 1 | Power Input | PinHeader_1x02_P2.00mm_Vertical | J4 |
| 1 | 10k Linear "Gain" | Potentiometer_Alpha_RV120F | RV1 |
| 1 | 100k Linear "Bass" | Potentiometer_Alpha_RV120F | RV2 |
| 1 | 100k Linear "Treble" | Potentiometer_Alpha_RV120F | RV3 |
| 1 | 100k Audio "HPF" | Potentiometer_Alpha_RV122F | RV4 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | BZX84C4V3-G3-08 BX84C4V3-G3-08 4.3 V | TSOT-23_HandSoldering | D2 |
| 2 | 33N 33n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | 100P 100p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4 |
| 1 | 2.2N 2.2n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 47N 47n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 4 | 82N 82n | C_Rect_L7.0mm_W2.0mm_P5.00mm | C7, C8, C9, C10 |
| 1 | 10U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 5 | dc | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C14, C15, C16 |
| 3 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 3 | 22K 22k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R8, R11 |
| 3 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R9, R25 |
| 4 | 3.3K 3.3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R12, R13, R14 |
| 2 | 120K 120k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16 |
| 2 | 20K 120k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18 |
| 4 | 130K 130k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R22, R23, R24 |
| 1 | 51 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 130K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
Channel Two v2 design files
The KiCad project lives in the bassistTech/ChannelTwoPreamp repository on GitHub; these links point at the commit this page was built from.
Channel Two v2: common questions
How big is the Channel Two v2 PCB?
The Channel Two v2 measures 84.3 × 24.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Channel Two v2?
54 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Channel Two v2 design files?
From the bassistTech/ChannelTwoPreamp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Channel Two v2 design in my own project?
Yes, under the terms of its MIT license, which bassistTech chose for the repository.