HardLabs

Test op

bec5-group·pid-controller·test-op/test-op.kicad_pcb

Test op PCB layout, top view — open source board by bec5-group

About the Test op PCB

Test op is an open source PCB design by bec5-group, published on GitHub. It is a 2-layer board measuring 79.5 × 38.9 mm, with 46 components from 22 distinct parts.

Other key parts include the HOLD, INT, RST1, VG and RST2. By type, the board carries 21 capacitors, 8 connectors, 7 resistors and 6 ICs.

From the project

11. Low Noise Linear Low Dropout(LDO) Voltage Regulator

11. Low Noise Linear Low Dropout(LDO) Voltage Regulator

Part Number|Power|Input|Output|Packaging -----------|-----|-----|------|--------- AD8421BR|±2.5V ~ ±18V (2mA)|(V-)+2.3V ~ (V+)-1.8V|(V-)+1.2V ~ (V+)-1.6V|8-MSOP / 8-SOIC LMH6505|±3.5V ~ ±6V (2μA)|±7mA / ±0.6V|±2.4V ~ ±3V|8-MSOP / 8-SOIC LM7171BIM|±2.75V ~ ±18V (7mA)|±10V (?)|±10V (For ±15V)|8-SOIC MAX44251|±1.35V ~ ±10V (1.15mA)|(V-)-0.05V ~ (V+)-1.5V|(V-)+0.03V ~ (V+) - 0.05V|8-MSOP / SOT-23-8 DG467/DG468|±4.5V ~ ±20V (20μA)|||6-TSOP DG469|±4.5V ~ ±20V (20μA)|||8-MSOP / 8-SOIC TPS7A30||3V ~ 35V|1.19V ~ 33V (150mA)|8-MSOP PowerPad…

Test op, from the project README
From the project README

Main components on the Test op

HOLDINTRST1VGRST2VG2

Test op bill of materials (BOM)

46 components, 22 distinct parts.

QtyPartRefs
1
HOLD
U1
1
INT
U2
1
RST1
U3
1
VG
U4
1
RST2
U5
1
VG2
U6
1
IN
P1
1
HOLD
P2
1
RST
P3
1
OUT
P4
1
VG
P5
1
IN2
P7
1
VG2
P8
1
OUT2
P9
1
100k
RV1
3
10k
RV2, RV3, RV4
19
1u
C1, C2, C3, C4, C5, C6, C7, C8 +11
2
0.1u
C12, C21
2
1k
R1, R6
2
100
R2, R5
Show 2 more
QtyPartRefs
1
100k
R3
2
10k
R4, R7

Test op design files

The KiCad project lives in the bec5-group/pid-controller repository on GitHub; these links point at the commit this page was built from.

Test op: common questions

How big is the Test op PCB?

The Test op measures 79.5 × 38.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Test op?

46 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Test op design files?

From the bec5-group/pid-controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Test op design in my own project?

The repository has no license, so all rights stay with bec5-group. Use it as a reference, and ask the author before reusing the design.

More boards in pid-controller