HardLabs

Gliss faceplate

BelaPlatform·gliss-hardware·gliss_faceplate/gliss_faceplate.kicad_pcb

Gliss faceplate PCB layout, top view — open source board by BelaPlatform

About the Gliss faceplate PCB

Gliss faceplate is an open source PCB design by BelaPlatform, published on GitHub. It is a 2-layer board measuring 20 × 128.5 mm, with 16 components from 3 distinct parts.

Other key parts include the D5V0F2U3LP. By type, the board carries 13 ICs and 3 connectors.

From the project

You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0. The firmware can be found in the repository https://github.com/BelaPlatform/gliss-firmware

Main components on the Gliss faceplate

D5V0F2U3LP

Gliss faceplate bill of materials (BOM)

16 components, 3 distinct parts.

QtyPartRefs
13
D5V0F2U3LP
Diodes Incorporated
U1, U2, U3, U4, U5, U6, U7, U8 +5
2
Conn_01x16_Male
Wurth Elektronik
J1, J2
1
Conn_01x26
P1

Gliss faceplate design files

The KiCad project lives in the BelaPlatform/gliss-hardware repository on GitHub; these links point at the commit this page was built from.

Gliss faceplate: common questions

How big is the Gliss faceplate PCB?

The Gliss faceplate measures 20 × 128.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Gliss faceplate?

16 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Gliss faceplate design files?

From the BelaPlatform/gliss-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Gliss faceplate design in my own project?

The repository has no license, so all rights stay with BelaPlatform. Use it as a reference, and ask the author before reusing the design.

More boards in gliss-hardware