HybridCoupler QCN3

BelmY·HybridCoupler_QCN3·Kicad/Qcn3AntennaBoard.kicad_pcb

HybridCoupler QCN3 PCB layout, top view — open source board by BelmY

About the HybridCoupler QCN3 PCB

HybridCoupler QCN3 is an open source PCB design by BelmY, published on GitHub. It is a 2-layer board measuring 20 × 20 mm, with 5 components from 3 distinct parts.

Other key parts include the QCN3. By type, the board carries 2 resistors and 1 IC.

From the project

PCB board for the hybrid coupler QCN3

It allows to do the right hand circular polarization without having to deal with coax cables.

Nano VNA results (with 2 50 ohms loads at the outputs)

Connect the 90º pin to the right of the 0º pin to allow right hand circular polarization. Make sure that the 2 output wires have the same length!

You can order it at jlcpcb or other companies using the gerber zip file in this repository. Make sure to order it with 1.6 board width and FR4.

HybridCoupler QCN3, from the project README
From the project README

Main components on the HybridCoupler QCN3

HybridCoupler QCN3 bill of materials (BOM)

5 components, 3 distinct parts.

QtyPartRefs
1
QCN3
U1
2
Conn_Coaxial_Small
0º, 90º
2
100
R1, R2

HybridCoupler QCN3 design files

The KiCad project lives in the BelmY/HybridCoupler_QCN3 repository on GitHub; these links point at the commit this page was built from.

HybridCoupler QCN3: common questions

How big is the HybridCoupler QCN3 PCB?

The HybridCoupler QCN3 measures 20 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HybridCoupler QCN3?

5 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the HybridCoupler QCN3 design files?

From the BelmY/HybridCoupler_QCN3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the HybridCoupler QCN3 design in my own project?

The repository has no license, so all rights stay with BelmY. Use it as a reference, and ask the author before reusing the design.