6 Axis Robot Controller

Biswajitpattanaik07·6_Axis_Robot_Controller

6 Axis Robot Controller PCB layout, top view — open source STM32 board by Biswajitpattanaik07

About the 6 Axis Robot Controller PCB

6 Axis Robot Controller is an open source STM32 PCB design by Biswajitpattanaik07, published on GitHub. It is a 2-layer board measuring 75.6 × 65.2 mm, with 85 components from 31 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the TPS53318DQPR, CP2102N-A01-GQFN24 and LM3480-3.3. By type, the board carries 26 capacitors, 24 resistors, 8 diodes, 6 transistors, 3 ICs and 1 inductor.

It belongs with the robotics & motion, rf & radio and usb & debug tools designs in this gallery.

From the project

Axion is an open-source controller board for a 6-axis articulated robot arm. It is built around an STM32F103C8T6 and combines six servo outputs, six per-joint IMU inputs, and three ways to talk to the outside world: USB, CAN bus, and an NRF24L01 wireless link.

Axion is an open-source controller board for a 6-axis articulated robot arm. It is built around an STM32F103C8T6 and combines six servo outputs, six per-joint IMU inputs, and three ways to talk to the outside world: USB, CAN bus, and an NRF24L01 wireless link.

The whole board runs from a single 12 V input. Everything else (5 V for servos and logic, 3.3 V for the MCU and radio) is generated on board.

6 Axis Robot Controller, from the project README
From the project README

Main components on the 6 Axis Robot Controller

6 Axis Robot Controller bill of materials (BOM)

85 components, 31 distinct parts.

QtyPartRefs
1
TPS53318DQPR
U2
1
CP2102N-A01-GQFN24
U3
1
LM3480-3.3
U4
6
DMN2056U
Q1, Q2, Q3, Q4, Q5, Q6
2
Crystal_GND23
8 MHz, 32 KHz
1
Barrel_Jack
12V POWER INPUT
6
Conn_01x04
IMU1, IMU2, IMU3, IMU4, IMU5, IMU6
1
Conn_02x04_Odd_Even
NRF24L01
6
Conn_01x03
SERVO1, SERVO2, SERVO3, SERVO4, SERVO5, SERVO6
1
STM32F103C8Tx
STM32F103C8T6
6
LED
D1, D2, D3, D4, D5, D6
2
D_TVS
D7, D8
1
4.7U
L1
2
4.7U
C1, C2
5
10N
C3, C4, C5, C6, C7
1
1U
C8
2
100N
C9, C17
7
1N
C10, C11, C12, C13, C14, C15, C16
1
100U
C18
2
1N
C19, C23
Show 11 more
QtyPartRefs
6
2U
C20, C21, C22, C24, C25, C26
2
4.7K
R1, R2
1
854K
R3
1
86.6K
R4
1
1K
R5
3
105K
R6, R7, R11
7
1.91K
R8, R9, R10, R12, R13, R14, R15
1
69.8K
R16
1
10K
R17
6
2k
R18, R19, R20, R21, R22, R23
1
120
R24

6 Axis Robot Controller design files

The KiCad project lives in the Biswajitpattanaik07/6_Axis_Robot_Controller repository on GitHub; these links point at the commit this page was built from.

6 Axis Robot Controller: common questions

What microcontroller does the 6 Axis Robot Controller use?

The 6 Axis Robot Controller is built around the STM32F103C8Tx, from the STM32 family.

How big is the 6 Axis Robot Controller PCB?

The 6 Axis Robot Controller measures 75.6 × 65.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 6 Axis Robot Controller?

85 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the 6 Axis Robot Controller design files?

From the Biswajitpattanaik07/6_Axis_Robot_Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 6 Axis Robot Controller design in my own project?

The repository has no license, so all rights stay with Biswajitpattanaik07. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 6 Axis Robot Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards