Toollock
bitraf·toollock·TheLock-schematics/TheLock-schematics.kicad_pcb
About the Toollock PCB
Toollock is an open source PCB design by bitraf, published on GitHub. It is a 2-layer board measuring 25.1 × 37.3 mm, with 12 components from 12 distinct parts.
By type, the board carries 4 connectors, 4 resistors, 2 transistors and 2 diodes.
It belongs with the iot & wireless designs in this gallery.
From the project
Know whether a tool is currently in its station Checking for neccesary safety course before allowing usage * Holding people responsible when equipment is not get returned or broken
Know whether a tool is currently in its station Checking for neccesary safety course before allowing usage * Holding people responsible when equipment is not get returned or broken
Each lock has a key with a matching key pattern. The key is physically attached to the tool using a wire. An optical sensor detects that the right key is used. IR leds normally light through, only a matching key will fully block light.

Toollock bill of materials (BOM)
12 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PMV20XNE | SOT-23W_Handsoldering | Q1 |
| 1 | IR PHOTOTRANS | D_0805 | Q2 |
| 1 | CONN_SIGNAL | Pin_Header_Angled_1x04_Pitch2.54mm | J1 |
| 1 | CONN_POWER | Pin_Header_Angled_1x04_Pitch2.54mm | J2 |
| 1 | CONN_IRBOARD | Socket_Strip_Angled_1x02_Pitch2.54mm | J3 |
| 1 | CONN_IRLED | Pin_Header_Angled_1x02_Pitch2.54mm | J4 |
| 1 | IR LED | LED_0805_HandSoldering | D1 |
| 1 | LED | LED_1206_HandSoldering | D2 |
| 1 | 10k | R_1210_HandSoldering | R1 |
| 1 | 47 | R_1210_HandSoldering | R2 |
| 1 | 18k | R_1210_HandSoldering | R3 |
| 1 | R | R_1210_HandSoldering | R4 |
Toollock design files
The KiCad project lives in the bitraf/toollock repository on GitHub; these links point at the commit this page was built from.
Toollock: common questions
How big is the Toollock PCB?
The Toollock measures 25.1 × 37.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Toollock?
12 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Toollock design files?
From the bitraf/toollock repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Toollock design in my own project?
The repository has no license, so all rights stay with bitraf. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547