TPDD Cable 1
About the TPDD Cable 1 PCB
TPDD Cable 1 is an open source PCB design by bkw777, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 10.4 × 13.3 mm, with 11 components from 9 distinct parts.
By type, the board carries 8 connectors and 3 transistors.
From the project
TTL-RS232 level-shifting cable for Tandy Portable Disk Drive
The BOM includes a grey cable. This black cable can be substituted if you want.
If you want to make 2 cables, one for Model 100 and one for PC/WP-2, then double the BOM components except for the cable, and cut the cable in half right in the middle. Otherwise just cut off the 9-pin plug to make one longer cable for Model 100 and other KC-85 clones.
Cut the unwanted plug off the cable. If building a Model 100 cable, cut off the 9-pin plug. If building a PC/WP-2 cable, cut off the 25-pin plug. If building both cables, cut the cable in half in the middle.
TPDD Cable 1 bill of materials (BOM)
11 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | DTA114EKA | SC-59 | Q1, Q2, Q3 |
| 1 | TPDD | 2-6-2_tpdd | J2 |
| 1 | RX | PTH_0.65x1.2 | P2 |
| 1 | TX | PTH_0.65x1.2 | P3 |
| 1 | CTS | PTH_0.65x1.2 | P4 |
| 1 | RTS | PTH_0.65x1.2 | P5 |
| 1 | DTR | PTH_0.65x1.2 | P6 |
| 1 | GND | PTH_0.65x1.2 | P7 |
| 1 | DSR | PTH_0.65x1.2 | P20 |
TPDD Cable 1 design files
The KiCad project lives in the bkw777/TPDD_Cable repository on GitHub; these links point at the commit this page was built from.
TPDD Cable 1: common questions
How big is the TPDD Cable 1 PCB?
The TPDD Cable 1 measures 10.4 × 13.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TPDD Cable 1?
11 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TPDD Cable 1 design files?
From the bkw777/TPDD_Cable repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TPDD Cable 1 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which bkw777 chose for the repository.
