Rotunda base
brainsmoke·rotunda·pcb/base/rotunda_base.kicad_pcb
About the Rotunda base PCB
Rotunda base is an open source STM32 PCB design by brainsmoke, published on GitHub. It is a 2-layer board measuring 24.7 × 25.8 mm, with 16 components from 6 distinct parts.
Its main chip is the STM32F030F4, from the STM32 family. By type, the board carries 11 connectors, 2 capacitors, 1 IC, 1 battery holder and 1 resistor.
From the project
charlieplexed PCB polyhedron

Main components on the Rotunda base
Rotunda base bill of materials (BOM)
16 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030F4 | TSSOP20 | IC1 |
| 10 | CONN_01X01 | pin | P1, P2, P3, P4, P5, P6, P7, P8 +2 |
| 1 | CONN_01X05 | stmdiscswd_5pin | P11 |
| 1 | Battery_Cell | bk-913 | BT1 |
| 2 | C | R_0603 | C1, C2 |
| 1 | 10k | R_0603 | R1 |
Rotunda base design files
The KiCad project lives in the brainsmoke/rotunda repository on GitHub; these links point at the commit this page was built from.
Rotunda base: common questions
What microcontroller does the Rotunda base use?
The Rotunda base is built around the STM32F030F4, from the STM32 family.
How big is the Rotunda base PCB?
The Rotunda base measures 24.7 × 25.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rotunda base?
16 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rotunda base design files?
From the brainsmoke/rotunda repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Rotunda base design in my own project?
The repository has no license, so all rights stay with brainsmoke. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rotunda base without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in rotunda
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k