Kicad design multi agent system
BruceZhq·kicad-design-multi-agent-system·examples/stm32g070-assisted-release-20260908/stm32g070rbt6-board.kicad_pcb
About the Kicad design multi agent system PCB
Kicad design multi agent system is an open source STM32 PCB design by BruceZhq, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 45 mm, with 35 components from 16 distinct parts.
Its main chip is the STM32G070RBT6, from the STM32 family. Other key parts include the AP2112K-3.3. By type, the board carries 14 capacitors, 9 resistors, 6 connectors, 2 ICs, 2 switches and 2 diodes.
From the project
Auditable KiCad hardware design with LangGraph multi-agent orchestration, Temporal workflows and deterministic evidence gates.
这是 2026-09-08 完成发布的工程副本,不是新强模型执行器自主成功率的评测结果。原任务经过多智能体流程、Codex 辅助实体修复、正常检查点续跑、制造重建和 Reviewer 审查后达到 release_ready。
打开 stm32g070rbt6-board.kicadpro;原理图与 PCB 可直接编辑。项目局部 Symbol/Footprint 已实体化复制到 .ratsnest-libs,通过 ${KIPRJMOD}` 引用,不依赖原机器绝对路径。使用 KiCad 9 或兼容版本;3D 模型可选,未复制整个系统 3D 库。
ERC 仍有 1 条 libsymbolmismatch warning;原审查以嵌入符号与已安装库的结构等价证据处理,未删除或抑制报告。证据保留在 release-evidence.json。采购 BOM 仍如实记录供应商证据不足,不能把电气发布就绪当成采购库存保证或样板实物验证。
Main components on the Kicad design multi agent system
Kicad design multi agent system bill of materials (BOM)
35 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G070RBT6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P1.27mm_Vertical | J2 |
| 2 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J3, J4 |
| 2 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J5, J6 |
| 2 | SW_Push | SW_Push_1P1T_NO_CK_KSC6xxJ | SW1, SW2 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 4 | 10UF 10uF | C_0603_1608Metric | C1, C4, C13, C14 |
| 3 | 1UF 1uF | C_0603_1608Metric | C2, C3, C8 |
| 1 | 10NF 10nF | C_0603_1608Metric | C5 |
| 5 | 100NF 100nF | C_0603_1608Metric | C6, C7, C9, C11, C12 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C10 |
| 2 | 4.7K 4.7k | R_0603_1608Metric | R1, R2 |
| 3 | 10K 10k | R_0603_1608Metric | R3, R4, R9 |
| 4 | 1k | R_0603_1608Metric | R5, R6, R7, R8 |
Kicad design multi agent system design files
The KiCad project lives in the BruceZhq/kicad-design-multi-agent-system repository on GitHub; these links point at the commit this page was built from.
Kicad design multi agent system: common questions
What microcontroller does the Kicad design multi agent system use?
The Kicad design multi agent system is built around the STM32G070RBT6, from the STM32 family.
How big is the Kicad design multi agent system PCB?
The Kicad design multi agent system measures 70 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad design multi agent system?
35 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kicad design multi agent system design files?
From the BruceZhq/kicad-design-multi-agent-system repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kicad design multi agent system design in my own project?
Yes, under the terms of its MIT license, which BruceZhq chose for the repository.
Can I test firmware for the Kicad design multi agent system without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k