Bleriot relay
About the Bleriot relay PCB
Bleriot relay is an open source PCB design by burgrp, published on GitHub. It is a 2-layer board measuring 80 × 40 mm, with 29 components from 22 distinct parts.
Other key parts include the PAN2110P0AA, PY32F003W1xSx, PSU, LM1117MP-3.3 and MOC306XMS. By type, the board carries 7 capacitors, 6 resistors, 5 ICs, 3 diodes, 2 crystals and 1 module.
Main components on the Bleriot relay
Bleriot relay bill of materials (BOM)
29 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PAN2110P0AA | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | PY32F003W1xSx | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | PSU | RQG 5V-0.6A-horizontal | U3 |
| 1 | LM1117MP-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | MOC306XMS | SMDIP-4_W7.62mm | U5 |
| 1 | Antenna_Shield | Texas_SWRA117D_2.4GHz_Right | A1 |
| 1 | SWD | SWD | X1 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TX | PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | IN | PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | IN1 |
| 1 | OUT | PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | OUT1 |
| 1 | B72650M251K72 | R_1210_3225Metric | RV1 |
| 1 | SENS | PhoenixContact_MSTBA_2,5_3-G_1x03_P5.00mm_Horizontal | SENS1 |
| 1 | BAT54S | SOT-23 | D1 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 1 | BTA08S-600CW | TO-252-2 | D3 |
| 3 | 100n | C_0805_2012Metric | C1, C3, C4 |
| 1 | 1u | C_0805_2012Metric | C2 |
| 3 | 10u | C_0805_2012Metric | C5, C6, C7 |
| 1 | 10k | R_0805_2012Metric | R1 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 270R | R_0805_2012Metric | R2, R6 |
| 3 | 680R | R_0805_2012Metric | R3, R4, R5 |
Bleriot relay design files
The KiCad project lives in the burgrp/bleriot-relay repository on GitHub; these links point at the commit this page was built from.
- Layoutboard/bleriot-relay.kicad_pcb
- Schematicboard/bleriot-relay.kicad_sch
Bleriot relay: common questions
How big is the Bleriot relay PCB?
The Bleriot relay measures 80 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bleriot relay?
29 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bleriot relay design files?
From the burgrp/bleriot-relay repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bleriot relay design in my own project?
The repository has no license, so all rights stay with burgrp. Use it as a reference, and ask the author before reusing the design.