Power Distribution Board
About the Power Distribution Board
Power Distribution Board is an open source PCB design by CabrilloRoboticsClub, published on GitHub under the MIT license. It is a 2-layer board measuring 72 × 111 mm, with 32 components from 16 distinct parts.
Other key parts include the BMR4800102/002 and PKU3511SPI. By type, the board carries 14 capacitors, 10 connectors, 3 resistors, 2 ICs, 2 jumpers and 1 diode.
Main components on the Power Distribution Board
Power Distribution Board bill of materials (BOM)
32 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BMR4800102/002 bmr480-45-to-60vin-12vout-1300w Digkey | bmr480-45-to-60vin-12vout-1300w | U1 |
| 1 | PKU3511SPI Digkey | PKU 3500S_FPM | U2 |
| 1 | CONN_01X02 Conn_01x02 Amazon | AMASS_XT60-M_1x02_P7.20mm_Vertical | J1 |
| 4 | CONN_01X02 Conn_01x02 Ebay | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J3, J4, J6, J7 |
| 1 | CONN_01X05 Conn_01x05 Mouser | Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical | J5 |
| 2 | CONN_01X02 Conn_01x02 Ebay | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J8, J9 |
| 2 | CONN_01X02 Conn_01x02 Digkey | Molex_KK-396_A-41791-0002_1x02_P3.96mm_Vertical | J10, J11 |
| 2 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 1 | D_Zener | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 5 | 470 uF Mouser | CAP_EEHZU1V471V | C1, C2, C3, C4, C5 |
| 5 | 220 uF Mouser | CAP_EEHZU1H221V | C6, C7, C8, C9, C10 |
| 2 | 330 uF Digkey | CAP_16SVPG330MX | C11, C12 |
| 1 | 470uF | PCAP_16x31.5-THRU-ELECT_NCA | C13 |
| 1 | 470 uF | PCAP_16x31.5-THRU-ELECT_NCA | C14 |
| 2 | R N/A | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1, R2 |
| 1 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
Power Distribution Board design files
The KiCad project lives in the CabrilloRoboticsClub/electrical repository on GitHub; these links point at the commit this page was built from.
Power Distribution Board: common questions
How big is the Power Distribution Board?
The Power Distribution Board measures 72 × 111 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power Distribution Board?
32 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power Distribution Board design files?
From the CabrilloRoboticsClub/electrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power Distribution Board design in my own project?
Yes, under the terms of its MIT license, which CabrilloRoboticsClub chose for the repository.
