Ethdemo
CalebJM04·Drone-Research-PDB·PDB/ethernet demo/ethdemo/ethdemo.kicad_pcb
About the Ethdemo PCB
Ethdemo is an open source STM32 PCB design by CalebJM04, published on GitHub. It is a 4-layer board measuring 77.5 × 67.5 mm, with 98 components from 33 distinct parts.
Its main chip is the STM32H742VGT6, from the STM32 family. Other key parts include the KSZ8863RLLI and TPS23861PWR. By type, the board carries 48 resistors, 34 capacitors, 6 diodes, 4 connectors, 3 ICs and 1 transistor.
It belongs with the robotics & motion designs in this gallery.
Main components on the Ethdemo
Ethdemo bill of materials (BOM)
98 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H742VGT6 STM32H742VGTx | LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | KSZ8863RLLI | KSZ8863RLLI | U2 |
| 1 | TPS23861PWR | TPS23861PWR | U3 |
| 1 | CSD19538Q3AT | CSD19538Q3AT | Q1 |
| 1 | ECS-250-10-30B-CKM 25MHz | Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 2 | 0826-1X1T-GJ-F | 0826-1X1T-GJ-F | J1, J2 |
| 1 | CONN_01X05_SOCKET Conn_01x05_Socket | PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | USB4085-GF-A USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J9 |
| 1 | 1206L010/60WR Fuse | Fuse_1206_3216Metric | F1 |
| 3 | LTST-C171KGKT LED | LED_0805_2012Metric | D3, D4, D5 |
| 1 | SMCJ60A | SMCJ60A | D6 |
| 1 | SMAJ4764A-TP | SMAJ100CA_13_F | D7 |
| 1 | 1N4001W 1N4001 | D_SMA | D8 |
| 1 | CL10A475KP8NNNC 4.7uF | C_0603_1608Metric | C1 |
| 6 | CL10A106MA8NRNC 100nF | C_0603_1608Metric | C2, C4, C6, C7, C8, C9 |
| 2 | CL10A225KP8NNNC 2.2uF | C_0603_1608Metric | C3, C5 |
| 14 | CL10B104KC8NNNC 0.1uF | C_0603_1608Metric | C10, C11, C12, C15, C16, C17, C18, C22 +6 |
| 3 | CL10A106MA8NRNC 10uF | C_0603_1608Metric | C19, C26, C36 |
| 2 | CL10B102KC8NNND 1nF | C_0603_1608Metric | C20, C21 |
| 2 | CL10C100JC81PNC 10pF | C_0603_1608Metric | C24, C25 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | CL10C220JB8NNNC 22uF | C_0603_1608Metric | C28, C29, C31, C35 |
| 3 | RCS0603270RFKEA 270 | R_0603_1608Metric | R3, R4, R5 |
| 4 | SG73P1JTTD1R00F 1Ohm | R_0603_1608Metric | R6, R7, R8, R9 |
| 1 | TLMQ1JER047FTD 47Ohm | R_0603_1608Metric | R10 |
| 1 | RCS060322R1FKEA 22.1Ohm | R_0603_1608Metric | R11 |
| 8 | RCS060349R9FKEA 49.9 Ohm | R_0603_1608Metric | R12, R13, R14, R15, R17, R18, R19, R20 |
| 1 | RCS060311K8FKEA 11.8kOhm | R_0603_1608Metric | R16 |
| 8 | RCP0603W1K00FEA 1kOhm | R_0603_1608Metric | R21, R22, R31, R34, R47, R48, R49, R50 |
| 6 | RCS060310K0FKEA 10kOhm | R_0603_1608Metric | R23, R32, R38, R39, R40, R41 |
| 7 | RCS060322R0FKEA 22 Ohm | R_0603_1608Metric | R24, R25, R26, R27, R28, R29, R37 |
| 3 | SG73P1JTTD4701F 4.7kOhm | R_0603_1608Metric | R35, R36, R42 |
| 4 | SG73P1JTTD2200F 220 Ohm | R_0603_1608Metric | R43, R44, R45, R46 |
| 2 | RCS06035K10FKEA 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R51, R52 |
Ethdemo design files
The KiCad project lives in the CalebJM04/Drone-Research-PDB repository on GitHub; these links point at the commit this page was built from.
Ethdemo: common questions
What microcontroller does the Ethdemo use?
The Ethdemo is built around the STM32H742VGT6, from the STM32 family.
How big is the Ethdemo PCB?
The Ethdemo measures 77.5 × 67.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ethdemo?
98 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ethdemo design files?
From the CalebJM04/Drone-Research-PDB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ethdemo design in my own project?
The repository has no license, so all rights stay with CalebJM04. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ethdemo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Drone-Research-PDB
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k