Module
About the Module
Module is an open source PCB design by cdumonde, published on GitHub. It is a 2-layer board measuring 30 × 30 mm, with 14 components from 6 distinct parts.
Other key parts include the 74LS353. By type, the board carries 9 resistors, 3 connectors, 1 IC and 1 capacitor.
From the project
EN223
Main components on the Module
Module bill of materials (BOM)
14 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS353 | TSSOP-16_4.4x5mm_Pitch0.65mm | U1 |
| 1 | CONN_01X01 | Pin_Header_Straight_1x01_Pitch2.54mm | J1 |
| 1 | CONN_02X03 | Pin_Header_Straight_2x03_Pitch2.54mm | J2 |
| 1 | CONN_01X04 | Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | C | C_0603_HandSoldering | C1 |
| 9 | R | R_0603_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
Module design files
The KiCad project lives in the cdumonde/Culture_Maker repository on GitHub; these links point at the commit this page was built from.
Module: common questions
How big is the Module?
The Module measures 30 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Module?
14 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Module design files?
From the cdumonde/Culture_Maker repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Module design in my own project?
The repository has no license, so all rights stay with cdumonde. Use it as a reference, and ask the author before reusing the design.
