PREROUTE
celeritous·STM32L152CCx_MODULE·STM32L152CCx_HARDWARE/REV_1.1/PREROUTE.kicad_pcb
About the PREROUTE PCB
PREROUTE is an open source STM32 PCB design by celeritous, published on GitHub. It is a 2-layer board measuring 50.8 × 20.3 mm, with 42 components from 27 distinct parts.
Its main chip is the STM32L152Cxx, from the STM32 family. Other key parts include the LM1117_SOT223 and 24FCxx_/MS. By type, the board carries 13 capacitors, 9 resistors, 6 connectors, 6 diodes, 3 ICs and 2 crystals.
It belongs with the usb & debug tools designs in this gallery.
From the project
STM32L152CCx_MODULE
This repository contains the hardware design and firmware templates for Celeritous' newest processor module. This board is based on the ST Micro Cortex M3 Low power STM32L151/152 processor line.
The current revision is 1.0 and this is the initial commit for review and comment.
It is being released as Open Source Hardware under the CERN OSH License ver 1.2
All hardware design files are in KiCAD format
Main components on the PREROUTE
PREROUTE bill of materials (BOM)
42 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM1117_SOT223 | SOT223_4 | U1 |
| 1 | STM32L152Cxx | QFP48_7X7_0.5 | U2 |
| 1 | 24FCxx_/MS | MSOP8 | U3 |
| 1 | ABM8G-12.00MHz | XTAL_3.2X2.5 | X1 |
| 1 | ABS10-32.768kHz | XTAL_1.8X4.9mm | X2 |
| 1 | USB_MINI_B_SMD | CONN_USB_UX60-MB | J1 |
| 2 | CONN_1x20 | HEADER_1X20_100MIL | P1, P2 |
| 1 | CONN_1x4 | Connector_1x4_100mil_TH | P3 |
| 1 | Header_2x1 | HEADER_1X2_2MM | P4 |
| 1 | CONN_1x3 | HEADER_1X3_2MM | P5 |
| 1 | FUSE_PTC_.75A_33V | P1210 | F1 |
| 1 | FUSE_PTC_.5A_33V | P1210 | F2 |
| 1 | PUSHBUTTON_SPST_3X4MM | SWITCH_SPST_3X4MM | SW1 |
| 2 | SMLJ33ABCT | MINI_SMA | D1, D3 |
| 1 | USBLC6-2 | SOT23-6 | D2 |
| 2 | Led_Small | D0805 | D4, D5 |
| 1 | BAT54C | SOT23-3 | D6 |
| 2 | 47uF | CAPACITOR_TANTALUM_C | C1, C2 |
| 4 | 12pF | P0603 | C3, C4, C6, C7 |
| 1 | 0.010uF | P0603 | C5 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 0.10uF | P0603 | C8, C10, C12 |
| 3 | 10.0uF | P0603 | C9, C11, C13 |
| 1 | 1.50kΩ | P0603 | R1 |
| 3 | ZERO_Ω | P0603 | R2, R7, R9 |
| 2 | 10.0kΩ | P0603 | R3, R4 |
| 2 | 220.0Ω | P0603 | R5, R6 |
| 1 | 4.70kΩ | P0603 | R8 |
PREROUTE design files
The KiCad project lives in the celeritous/STM32L152CCx_MODULE repository on GitHub; these links point at the commit this page was built from.
PREROUTE: common questions
What microcontroller does the PREROUTE use?
The PREROUTE is built around the STM32L152Cxx, from the STM32 family.
How big is the PREROUTE PCB?
The PREROUTE measures 50.8 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PREROUTE?
42 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the PREROUTE design files?
From the celeritous/STM32L152CCx_MODULE repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PREROUTE design in my own project?
The repository has no license, so all rights stay with celeritous. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PREROUTE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in STM32L152CCx_MODULE
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k