ID interface
About the ID interface PCB
ID interface is an open source PCB design by cherry-takuan, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 209.6 × 154.9 mm, with 81 components from 9 distinct parts.
Other key parts include the CD74HC00. By type, the board carries 30 ICs, 23 capacitors, 11 connectors, 11 diodes and 6 resistors.
From the project
NLP(Nand Logic Processor)のリポジトリ
ALU制御回路回路はALUを操作するための制御信号生成し，また演算結果からフラグを生成する機能を持っています。 #### ALU本体 aluc
最新バージョン : v1.1 *** ### レジスタファイル レジスタファイルとは，プロセッサ内で一時的に記憶するレジスタと呼ばれる回路を複数集積したものです。NLP-16Aでは16bitのデータを記憶可能なレジスタを16本持っています。
汎用レジスタは5本で，残りのレジスタは何らかの役割を持ち，単純な記憶以外の動作も行うことがあります。
最新バージョン : v1.2 *** ### 入出力 NLP-16Aは16 bit x 64 kwordの1つの入出力ポートを持っています。 内部的にはレジスタの一つとしてアクセス可能な構造になっています。
主記憶及び外部デバイスとの接続に使用されます。 #### 外部バス制御 Busterminator
Main components on the ID interface
ID interface bill of materials (BOM)
81 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 30 | CD74HC00 | DIP-14_W7.62mm | U1, U2, U3, U4, U5, U6, U7, U8 +22 |
| 5 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J1, J5, J6, J7, J8 |
| 1 | Conn_02x10_Counter_Clockwise | PinHeader_2x10_P2.54mm_Horizontal | J2 |
| 5 | Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Horizontal | J3, J4, J9, J10, J11 |
| 11 | LED | LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +3 |
| 22 | C | C_Disc_D7.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 +14 |
| 1 | C_Polarized | CP_Radial_D5.0mm_P2.50mm | C23 |
| 5 | R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5 |
| 1 | R_Network08_Split | R_Array_SIP9 | RN1 |
ID interface design files
The KiCad project lives in the cherry-takuan/nlp repository on GitHub; these links point at the commit this page was built from.
ID interface: common questions
How big is the ID interface PCB?
The ID interface measures 209.6 × 154.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ID interface?
81 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the ID interface design files?
From the cherry-takuan/nlp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ID interface design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which cherry-takuan chose for the repository.
More boards in nlp
Alu c
209.6 × 154.9 mm169 parts2LCC-BY-SA-4.045
Y BUS Ctrl
209.6 × 154.9 mm150 parts2LCC-BY-SA-4.045
A BUS Ctrl
209.6 × 154.9 mm144 parts2LCC-BY-SA-4.045
Reg
209.6 × 154.9 mm139 parts2LCC-BY-SA-4.045
Instruction decoder
209.6 × 154.9 mm133 parts2LCC-BY-SA-4.045
Alu ctrl
209.6 × 154.9 mm108 parts2LCC-BY-SA-4.045
Accumulator
209.6 × 154.9 mm106 parts2LCC-BY-SA-4.045
BUS terminator
209.6 × 154.9 mm74 parts2LCC-BY-SA-4.045
RS 232
99.7 × 99.7 mm55 parts2LCC-BY-SA-4.045
IO board
99.7 × 99.7 mm36 parts2LCC-BY-SA-4.045
RAM board
99.7 × 99.7 mm19 parts2LCC-BY-SA-4.045