Open rally remote

chirauki·open-rally-remote·electronics/joystick-pcb/joystick.kicad_pcb

Open rally remote PCB layout, top view — open source board by chirauki

About the Open rally remote PCB

Open rally remote is an open source PCB design by chirauki, published on GitHub. It is a 2-layer board measuring 20.6 × 22.4 mm, with 6 components from 3 distinct parts.

By type, the board carries 4 switches, 1 fuse and 1 diode.

It belongs with the iot & wireless designs in this gallery.

From the project

Open-source Bluetooth handlebar remote for motorcycle navigation and roadbooks. Compact, rugged, and designed for anyone to build.

The joystick PCB carries the four C&K KSC2 switches under the stick's cross disc, and the 5 V input protection for the whole remote. It fits the V0.23 enclosure (CAD, notes).

Status: designed and checked in KiCad (ERC, DRC and schematic parity clean). Not yet built.

- Two layers, 1.6 mm FR-4, 1 oz copper. Ground pour on both sides. - Outline 20.6 × 22.4 mm, with a 3.3 mm radius notch at each corner for the lower cover-screw bosses. The same numbers are in the CAD (joypcbhx, joypcbhy, joypcbnotchr`). - Rules: 0.2 mm clearance, 0.25 mm signal tracks, 0.8 mm supply tracks, 0.6/0.3 mm vias, 0.3…

Open rally remote, from the project README
From the project README

Open rally remote bill of materials (BOM)

6 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MF-MSMF050-2
Bourns
F1
4
KSC222JLFS
C&K
SW1, SW2, SW3, SW4
1
SMBJ5.0A
Littelfuse
D1

Open rally remote design files

The KiCad project lives in the chirauki/open-rally-remote repository on GitHub; these links point at the commit this page was built from.

Open rally remote: common questions

How big is the Open rally remote PCB?

The Open rally remote measures 20.6 × 22.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Open rally remote?

6 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Open rally remote design files?

From the chirauki/open-rally-remote repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Open rally remote design in my own project?

The repository has no license, so all rights stay with chirauki. Use it as a reference, and ask the author before reusing the design.

Similar boards