Pi Handheld - Left shoulder
About the Pi Handheld - Left shoulder PCB
Pi Handheld - Left shoulder is an open source PCB design by cinnamondev, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 22 × 35 mm, with 5 components from 5 distinct parts.
By type, the board carries 2 resistors, 1 connector, 1 switch and 1 capacitor.
From the project
Handheld Games Console, powered by the Compute Module 4. Work in Progress
Kicad 6+ is required for these files. If you want to build this board yourself, I reccomend using the Gerber files built in the Releases section instead. If you want to combine these there are plenty of gerber paneliser softwares available. (Maybe only combine the left shoulder and adaptor as you will likely exceed the JLCPCB sizes).
Pi Handheld - Left shoulder bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x03_Female | SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm | J1 |
| 1 | SW_SPST | SW_EVQ-P7J01P | SW1 |
| 1 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
Pi Handheld - Left shoulder design files
The KiCad project lives in the cinnamondev/gamepithing repository on GitHub; these links point at the commit this page was built from.
Pi Handheld - Left shoulder: common questions
How big is the Pi Handheld - Left shoulder PCB?
The Pi Handheld - Left shoulder measures 22 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pi Handheld - Left shoulder?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pi Handheld - Left shoulder design files?
From the cinnamondev/gamepithing repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pi Handheld - Left shoulder design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which cinnamondev chose for the repository.
