PCB Challenge - Slave
About the PCB Challenge - Slave
PCB Challenge - Slave is an open source PCB design by D1360-64RC14, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 94.9 × 90.4 mm, with 21 components from 2 distinct parts.
By type, the board carries 20 diodes and 1 connector.
From the project
Projeto criado para o JuliaLabs PCB Challenge com o tema Natal
Uma estrela de Natal 3D de duas PCBs feita para ser colocada em cima da sua árvore de Natal. Brilhando com ajuda de 40 LEDs RGB WS2812B para levar os FPS de sua árvore para os céus, e um humilde ESP-01 em seu coração para trazer mais felicidade ao seu Natal.
- Suporta uma tensão de 5V a 12V graças aos reguladores de tensão TLV1117; - A placa Master pode funcionar independentemente da placa Slave; - LEDs controlados pelo pino GPIO0; - PCB de 1.2mm a 1.4mm de espessura.
PCB Challenge - Slave bill of materials (BOM)
21 components, 2 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 20 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +12 |
PCB Challenge - Slave design files
The KiCad project lives in the D1360-64RC14/RGB-Christmas-Star repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb_challenge-slave.kicad_pcb
- Schematicpcb_challenge-slave.kicad_sch
PCB Challenge - Slave: common questions
How big is the PCB Challenge - Slave?
The PCB Challenge - Slave measures 94.9 × 90.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB Challenge - Slave?
21 components, from 2 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB Challenge - Slave design files?
From the D1360-64RC14/RGB-Christmas-Star repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB Challenge - Slave design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which D1360-64RC14 chose for the repository.
