Indicator panel
dabridgham·Indicator-Panel
About the Indicator panel PCB
Indicator panel is an open source PCB design by dabridgham, published on GitHub. It is a 2-layer board measuring 133.1 × 77.2 mm, with 76 components from 17 distinct parts.
Other key parts include the MAX3094E, STP16CP05, MAX3033E and SPX1117M3-L-3-3. By type, the board carries 48 diodes, 9 resistors, 7 capacitors, 6 ICs and 5 connectors.
From the project
Indicator panel (blinkenlights) for the QSIC
Main components on the Indicator panel
Indicator panel bill of materials (BOM)
76 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX3094E | SOIC-16_3.9x9.9mm_Pitch1.27mm | U101 |
| 3 | STP16CP05 | SOIC-24_7.5x15.4mm_Pitch1.27mm | U102, U103, U106 |
| 1 | MAX3033E | SOIC-16_3.9x9.9mm_Pitch1.27mm | U104 |
| 1 | SPX1117M3-L-3-3 | SOT-223 | U108 |
| 1 | Power In (5 - 12V) | PJ-032B | J101 |
| 1 | Data in | Pin_Header_Angled_2x05 | P101 |
| 1 | Data Out | Socket_Strip_Angled_2x05 | P102 |
| 1 | Power | Pin_Header_Angled_2x04 | P103 |
| 1 | Power | Socket_Strip_Angled_2x04 | P104 |
| 1 | Power Logo | Barrel | PowerLogo1 |
| 48 | LED-45 | LED-0805 | D101, D102, D103, D104, D105, D106, D107, D108 +40 |
| 1 | 0.1μF | CP_Tantalum_Case-R_EIA-2012-12_Reflow | C101 |
| 1 | 10μF | CP_Tantalum_Case-R_EIA-2012-12_Wave | C102 |
| 5 | 100nF | C_0805 | C103, C104, C105, C106, C107 |
| 3 | 5.6kΩ | R_0805 | R101, R102, R103 |
| 4 | 150Ω | R_0805 | R104, R105, R106, R107 |
| 2 | 1kΩ | R_0805 | R110, R111 |
Indicator panel design files
The KiCad project lives in the dabridgham/Indicator-Panel repository on GitHub; these links point at the commit this page was built from.
Indicator panel: common questions
How big is the Indicator panel PCB?
The Indicator panel measures 133.1 × 77.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Indicator panel?
76 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Indicator panel design files?
From the dabridgham/Indicator-Panel repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Indicator panel design in my own project?
The repository has no license, so all rights stay with dabridgham. Use it as a reference, and ask the author before reusing the design.