HardLabs

StarShield plate

DankFlumeMister·StarShield·hardware/pcb/StarShield/Starshield-plate.kicad_pcb

StarShield plate PCB layout, top view — open source board by DankFlumeMister

About the StarShield plate PCB

StarShield plate is an open source PCB design by DankFlumeMister, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 374.7 × 127.1 mm, with 95 components from 1 distinct parts.

It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.

From the project

开源 95 键无线机械键盘（ZMK + BLE Dongle + per-key RGB）：设计文档、KiCad 原理图与固件配置

目标是一把 95 键紧凑全尺寸单体键盘：键盘本体经 BLE 连接一个 USB Dongle， Dongle 插在主机上，从而获得接近 2.4GHz 的无线体验。硬件设计、固件与教程全部开放。

- 95 键紧凑全尺寸单体键盘（含独立小键盘与导航键簇） - 无线优先：Body（键盘本体）作为 BLE peripheral，Dongle 作为 BLE central - USB-C 有线备用：充电 + 有线模式 - ZMK Studio 浏览器实时改键 - Per-key RGB：95 颗独立发光，组合键控制开关/亮度/颜色/灯效 - 硬件开源，新手可复刻 - 控制器模块同时兼容 nice!nano v2 与 SuperMini nRF52840（低成本路线）

KiCad 工程：用 KiCad 打开 hardware/pcb/StarShield/Starshield.kicadpro`。

StarShield plate bill of materials (BOM)

95 components, 1 distinct parts.

QtyPartRefs
95
—
P1, P2, P3, P4, P5, P6, P7, P8 +87

StarShield plate design files

The KiCad project lives in the DankFlumeMister/StarShield repository on GitHub; these links point at the commit this page was built from.

StarShield plate: common questions

How big is the StarShield plate PCB?

The StarShield plate measures 374.7 × 127.1 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the StarShield plate?

95 components, from 1 distinct parts. The full bill of materials is listed on this page.

Where can I download the StarShield plate design files?

From the DankFlumeMister/StarShield repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the StarShield plate design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which DankFlumeMister chose for the repository.

More boards in StarShield

Similar boards