SkateLightBackLEDBoard
dannyandreev·BOM-Lights·Electrical/SkateLightLEDBoard/SkateLightBackLEDBoard1.6/SkateLightBackLEDBoard.kicad_pcb
About the SkateLightBackLEDBoard PCB
SkateLightBackLEDBoard is an open source PCB design by dannyandreev, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 50.5 × 13.3 mm, with 33 components from 10 distinct parts.
Other key parts include the MCP9700AT-E_TT. By type, the board carries 14 diodes, 4 resistors, 3 LEDs, 2 ICs, 2 transistors and 2 connectors.
Main components on the SkateLightBackLEDBoard
SkateLightBackLEDBoard bill of materials (BOM)
33 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MCP9700AT-E_TT | SOT-23 | U1, U2 |
| 2 | Q_Photo_NPN_EC | D_0603_1608Metric | Q1, Q3 |
| 2 | Conn_02x04_Odd_Even | Conn_2x4_0.05in | J1, J2 |
| 6 | MountingHole_Pad | MH_0-80_Screw_Grounded | H1, H2, H3, H4, H5, H6 |
| 3 | Heatsink_Pad | BomLightBackLEDHeatsink | HS1, HS2, HS3 |
| 12 | LED_PAD_REV | SST-10-DR-B90-G660 | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 1 | LEDR | D_0402_1005Metric | D13 |
| 1 | LEDG | D_0402_1005Metric | D14 |
| 2 | 100k 1% | R_0402_1005Metric | R1, R2 |
| 2 | 2k7 5% | R_0402_1005Metric | R3, R4 |
SkateLightBackLEDBoard design files
The KiCad project lives in the dannyandreev/BOM-Lights repository on GitHub; these links point at the commit this page was built from.
SkateLightBackLEDBoard: common questions
How big is the SkateLightBackLEDBoard PCB?
The SkateLightBackLEDBoard measures 50.5 × 13.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SkateLightBackLEDBoard?
33 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SkateLightBackLEDBoard design files?
From the dannyandreev/BOM-Lights repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the SkateLightBackLEDBoard design in my own project?
Yes, under the terms of its AGPL-3.0 license, which dannyandreev chose for the repository.