Serialization board
About the Serialization board
Serialization board is an open source PCB design by davorvr, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 24.9 × 74.2 mm, with 16 components from 9 distinct parts.
Other key parts include the MCP_X. By type, the board carries 5 connectors, 1 IC and 1 capacitor.
From the project
Everything needed to build a working MIROSLAV device.
This repo holds everything needed to build a working MIROSLAV device. Arduino firmware and Record-a-SLAV, a Python data acquisition script, can be found in the MIROSLAV-firmware repository. A complete, user-friendly MIROSLAV software toolkit for analysis of MIROSLAV data, from raw data to statistical analysis, can be found in the MIROSLAV-analysis repository - also contains an example dataset of real data recorded in our lab.
Main components on the Serialization board
Serialization board bill of materials (BOM)
16 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP_X | DIP-28_W7.62mm | U1 |
| 1 | 3.3V IN | TE_HDI_2_horiz | J1 |
| 1 | I2C | TE_HDI_4_vert | J2 |
| 1 | INT | TE_HDI_2_horiz | J3 |
| 1 | 3.3V stack | PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | I2C stack | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | I2C stack | PinSocket_1x04_P2.54mm_Vertical | I2C stack |
| 8 | PIR_IN | TE_HDI_2_horiz | PHL0, PHL1, PHL2, PHL3, PHL4, PHL5, PHL6, PHL7 |
| 1 | U1 Decoupling | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
Serialization board design files
The KiCad project lives in the davorvr/MIROSLAV-hardware repository on GitHub; these links point at the commit this page was built from.
Serialization board: common questions
How big is the Serialization board?
The Serialization board measures 24.9 × 74.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Serialization board?
16 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Serialization board design files?
From the davorvr/MIROSLAV-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Serialization board design in my own project?
Yes, under the terms of its GPL-3.0 license, which davorvr chose for the repository.
