DMH Slew Mk2 PCB Main
DeMarco·DMH-Slew-Mk2·DMH_Slew_Mk2_PCB_Main/DMH_Slew_Mk2_PCB_Main.kicad_pcb
About the DMH Slew Mk2 PCB Main
DMH Slew Mk2 PCB Main is an open source PCB design by DeMarco, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 49 × 175 mm, with 32 components from 12 distinct parts.
Other key parts include the LM4040LP-10. By type, the board carries 22 connectors, 3 jumpers, 3 capacitors, 2 diodes, 1 IC and 1 resistor.
From the project
Second version of my Voltage Controlled Slew Limiter in Kosmo format.
Main components on the DMH Slew Mk2 PCB Main
DMH Slew Mk2 PCB Main bill of materials (BOM)
32 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM4040LP-10 | TO-92_Inline | U10 |
| 10 | TS_Jack_6.35mm_Sw | CUI_SJ-63083D | J1, J2, J3, J4, J5, J6, J7, J8 +2 |
| 4 | Conn_02x03_Top_Bottom | PinSocket_2x03_P2.54mm_Vertical | J14, J16, J24, J26 |
| 2 | Conn_02x06_Top_Bottom | PinSocket_2x06_P2.54mm_Vertical | J15, J25 |
| 4 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J17, J18, J27, J28 |
| 1 | IDC_02x08 | IDC-Header_2x08_P2.54mm_Vertical_Eurorack | J100 |
| 1 | IDC_02x05 | IDC-Header_2x05_P2.54mm_Vertical_BackBone | J200 |
| 3 | Jumper_3_Bridged12 | PinHeader_1x03_P2.54mm_Vertical | JP1, JP2, JP3 |
| 2 | SB140 | D_DO-41_SOD81_P10.16mm_Horizontal | D3, D4 |
| 2 | 47uF | CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 1 | 100nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C5 |
| 1 | 470R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R49 |
DMH Slew Mk2 PCB Main design files
The KiCad project lives in the DeMarco/DMH-Slew-Mk2 repository on GitHub; these links point at the commit this page was built from.
DMH Slew Mk2 PCB Main: common questions
How big is the DMH Slew Mk2 PCB Main?
The DMH Slew Mk2 PCB Main measures 49 × 175 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DMH Slew Mk2 PCB Main?
32 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the DMH Slew Mk2 PCB Main design files?
From the DeMarco/DMH-Slew-Mk2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DMH Slew Mk2 PCB Main design in my own project?
Yes, under the terms of its CC0-1.0 license, which DeMarco chose for the repository.