Stm32 resonance driver
dertrennawieser·stm32_resonance_driver·example/drsstc/schematic/stm32_drsstc.kicad_sch
About the Stm32 resonance driver PCB
Stm32 resonance driver is an open source STM32 PCB design by dertrennawieser, published on GitHub. It is a board, with 99 components from 49 distinct parts.
Its main chip is the STM32G474RBT6, from the STM32 family. Other key parts include the IXDD614PI, LM7818_TO220, LM7805_TO220 and LM1084-3.3. By type, the board carries 40 capacitors, 16 resistors, 15 connectors, 12 diodes, 8 ICs and 4 jumpers.
Main components on the Stm32 resonance driver
Stm32 resonance driver bill of materials (BOM)
99 components, 49 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | IXDD614PI | DIP-8_W7.62mm_Socket | U1, U2, U3, U4 |
| 1 | STM32G474RBT6 | LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | LM7818_TO220 | TO-220-3_Vertical | U6 |
| 1 | LM7805_TO220 | TO-220-3_Vertical | U7 |
| 1 | LM1084-3.3 | TO-220-3_Vertical | U8 |
| 1 | Crystal | Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | CT_IN | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | HB1_OUT | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | HB2_OUT | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | POWER_IN | TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | COMP_DEBUG | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | SWD | PinHeader_1x07_P2.54mm_Vertical | J6 |
| 1 | OPAMP_IN | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | POT_1 | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | POT_2 | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | SWITCH | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | EXT_LED | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | Conn_01x12 | PinHeader_1x12_P2.54mm_Vertical | J12 |
| 1 | SERIAL | PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | I2C | PinHeader_1x04_P2.54mm_Vertical | J14 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | ~ | L_CommonModeChoke_TDK_ACM7060 | FL1 |
| 1 | BURST_MODE | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | CASCADE_AMP | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | CONN_OPAMP_COMP | PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | CONN_OPAMP_ADC | PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | SW_RESET | SW_SPST_B3S-1000 | SW1 |
| 4 | US1A | D_SMA_Handsoldering | D1, D2, D3, D4 |
| 1 | 3.3V | D_SMA_Handsoldering | D5 |
| 1 | D_Bridge | Diode_Bridge_OnSemi_SDIP-4L | D6 |
| 4 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D7, D8, D9, D10 |
| 2 | D | D_SMA_Handsoldering | D11, D12 |
| 1 | FerriteBead | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | FB1 |
| 2 | 27pF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 4 | 1n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C36, C37, C38 |
| 8 | 100p | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5, C6, C7, C32, C33, C34, C35 |
| 6 | 1u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C9, C10, C11, C19, C21 |
| 12 | 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12, C13, C14, C15, C16, C22, C23, C25 +4 |
| 1 | 4.7u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C17 |
| 2 | 2u2 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C18, C20 |
| 4 | 330u | CP_Radial_D10.0mm_P5.00mm | C24, C27, C28, C40 |
| 1 | C | C_Disc_D7.5mm_W2.5mm_P5.00mm | C31 |
| 1 | 3.3 | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1 |
| 3 | 50 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4 |
| 2 | 15R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6 |
| 2 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8 |
| 5 | 470R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R10, R11, R12, R13 |
| 2 | 2k2 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R15 |
| 1 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16 |
Stm32 resonance driver design files
The KiCad project lives in the dertrennawieser/stm32_resonance_driver repository on GitHub; these links point at the commit this page was built from.
Stm32 resonance driver: common questions
What microcontroller does the Stm32 resonance driver use?
The Stm32 resonance driver is built around the STM32G474RBT6, from the STM32 family.
How many components are on the Stm32 resonance driver?
99 components, from 49 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32 resonance driver design files?
From the dertrennawieser/stm32_resonance_driver repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Stm32 resonance driver design in my own project?
The repository has no license, so all rights stay with dertrennawieser. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32 resonance driver without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k