NFC-Cards

DevX-Dragon·NFC-Cards·KiCad Files/12. PCB Business Card.kicad_pcb

NFC-Cards PCB layout, top view — open source board by DevX-Dragon

About the NFC-Cards PCB

NFC-Cards is an open source PCB design by DevX-Dragon, published on GitHub. It is a 2-layer board measuring 89 × 50.8 mm, with 4 components from 4 distinct parts.

Other key parts include the NT3H2111W0 FHKH. By type, the board carries 1 IC, 1 diode, 1 capacitor and 1 resistor.

From the project

Cool NFC Cards you can carry around

- Clone the repository (or download the kicad folder). Open it. Modify the silkscreen to your likings. I used Canva. Then export gerber files. And Get it manufactured (JLCPCB.PCBWAY,etc) - Dont forget to post yours online!

OR You can buy x2 fully assembled NFC cards for USD $38.00 on JLC PCB

NFC-Cards, from the project README
From the project README

Main components on the NFC-Cards

NFC-Cards bill of materials (BOM)

4 components, 4 distinct parts.

QtyPartRefs
1
NT3H2111W0 FHKH
NT3H1101
U1
1
LED
D1
1
220nF
C1
1
RC0402FR-0747RL
47
R1

NFC-Cards design files

The KiCad project lives in the DevX-Dragon/NFC-Cards repository on GitHub; these links point at the commit this page was built from.

NFC-Cards: common questions

How big is the NFC-Cards PCB?

The NFC-Cards measures 89 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the NFC-Cards?

4 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the NFC-Cards design files?

From the DevX-Dragon/NFC-Cards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the NFC-Cards design in my own project?

The repository has no license, so all rights stay with DevX-Dragon. Use it as a reference, and ask the author before reusing the design.