Induction heater controller
About the Induction heater controller PCB
Induction heater controller is an open source STM32 PCB design by diondokter, published on GitHub. It is a 2-layer board measuring 64 × 56 mm, with 29 components from 21 distinct parts.
Its main chip is the STM32G030F6P6TR, from the STM32 family. Other key parts include the THVD1449DR and NCP718ASN330T1G. By type, the board carries 6 capacitors, 5 resistors, 4 connectors, 3 ICs, 3 diodes and 2 switches.
Main components on the Induction heater controller
Induction heater controller bill of materials (BOM)
29 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | THVD1449DR | SOIC-8_3.9x4.9mm_P1.27mm | IC1 |
| 1 | STM32G030F6P6TR STM32G030F6Px | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | NCP718ASN330T1G NCP718xSN330 | SOT-23-5 | U2 |
| 1 | Fan_3pin | FanPinHeader_1x03_P2.54mm_Vertical | M1 |
| 2 | 54601-906WPLF RJ12 | RJ12_Amphenol_54601 | J2, J4 |
| 1 | TB007-508-02BE Screw_Terminal_01x02 | PhoenixContact_MSTBVA_2,5_2-G_1x02_P5.00mm_Vertical | J3 |
| 1 | 67997-212HLF Conn_02x06_Top_Bottom | PinHeader_2x06_P2.54mm_Vertical | J5 |
| 4 | MountingHole | Banana_Jack_1Pin | H1, H2, H3, H4 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 2 | TS02-66-60-BK-160-SCR-D SW_Push | SW_PUSH_6mm | SW1, SW3 |
| 1 | RB520S30T5G D | D_SOD-523 | D1 |
| 1 | 150080RS75000 LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | 150080GS75000 LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 3 | CL21B104KCFSFNG 100n | C_0805_2012Metric | C1, C2, C4 |
| 1 | CL21A475KAQNNNG 4.7u | C_0805_2012Metric | C3 |
| 2 | CL21B105KAFNNNE 1u | C_0805_2012Metric | C5, C6 |
| 1 | RC0805JR-1010KL 10k | R_0805_2012Metric | R1 |
| 1 | RC0805FR-07120RL 120 | R_0805_2012Metric | R2 |
| 1 | RC0805JR-1010KL 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | RC0805JR-10100RL 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RC0805FR-0720RL 20 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Induction heater controller design files
The KiCad project lives in the diondokter/induction-heater repository on GitHub; these links point at the commit this page was built from.
Induction heater controller: common questions
What microcontroller does the Induction heater controller use?
The Induction heater controller is built around the STM32G030F6P6TR, from the STM32 family.
How big is the Induction heater controller PCB?
The Induction heater controller measures 64 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Induction heater controller?
29 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Induction heater controller design files?
From the diondokter/induction-heater repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Induction heater controller design in my own project?
The repository has no license, so all rights stay with diondokter. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Induction heater controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in induction-heater
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9k
STM32Type g
169 × 30 mm24 parts2LApache-2.02.9k
STM32Main panel
234 × 84 mm26 parts4LApache-2.02.9k
STM32Type a
150 × 30 mm14 parts2LApache-2.02.9k
STM32Type c
188 × 30 mm17 parts2LApache-2.02.9k