Boardsource-StenoSquid

disarmyouwitha·Boardsource-StenoSquid·draft-1/steno-squid.kicad_pcb

Boardsource-StenoSquid PCB layout, top view — open source board by disarmyouwitha

About the Boardsource-StenoSquid PCB

Boardsource-StenoSquid is an open source PCB design by disarmyouwitha, published on GitHub. It is a 2-layer board measuring 22 × 17 mm, with 5 components from 5 distinct parts.

Other key parts include the W25Q128JVSIQ. By type, the board carries 2 capacitors, 1 IC, 1 connector and 1 resistor.

It belongs with the iot & wireless designs in this gallery.

From the project

Community QSPI flash daughterboard for the Boardsource Wireless Corne SMT — Steno Squid prototype CAD and research

A compact QSPI flash daughterboard for the left expansion header of the Boardsource Wireless Corne SMT, intended for onboard Javelin stenography. This is an independent community accessory project.

Open Draft A in KiCad · Front · Back · Schematic · STEP assembly

- 22 × 17 mm outline, provisional 1.0 mm PCB thickness, two copper layers. - Eight direct contacts in one row at a provisional 2.54 mm pitch, spanning 17.78 mm between first and last centers. - W25Q128JVSIQ prototype flash in a verified 208-mil SOIC-8 footprint, providing 16 MB storage. - 100 nF local decoupling and 10 kΩ CS…

Boardsource-StenoSquid, from the project README
From the project README

Main components on the Boardsource-StenoSquid

Boardsource-StenoSquid bill of materials (BOM)

5 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
W25Q128JVSIQ
W25Q128JVSIQ / SOIC-208 prototype
Winbond
U1
1
1x08 2.54mm / HOST FIT PROVISIONAL
TBD
J1
1
GRM188R71C104KA01D
100nF
Murata
C1
1
GRM188R61A105KA61D
1uF / DNP
Murata
C2
1
RC0603FR-0710KL
10k
Yageo
R1

Boardsource-StenoSquid design files

The KiCad project lives in the disarmyouwitha/Boardsource-StenoSquid repository on GitHub; these links point at the commit this page was built from.

Boardsource-StenoSquid: common questions

How big is the Boardsource-StenoSquid PCB?

The Boardsource-StenoSquid measures 22 × 17 mm, has 2 copper layers and is 1 mm thick.

How many components are on the Boardsource-StenoSquid?

5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Boardsource-StenoSquid design files?

From the disarmyouwitha/Boardsource-StenoSquid repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Boardsource-StenoSquid design in my own project?

The repository has no license, so all rights stay with disarmyouwitha. Use it as a reference, and ask the author before reusing the design.

Similar boards