CAN4DISCO
About the CAN4DISCO PCB
CAN4DISCO is an open source STM32 PCB design by DistRap, published on GitHub under the Custom license license. It is a 2-layer board measuring 90 × 90 mm, with 24 components from 9 distinct parts.
Its main chip is the STM32F4_Discovery_Header, from the STM32 family. Other key parts include the SN65HVD230DR. By type, the board carries 14 connectors, 6 resistors and 2 ICs.
From the project
DistRap boards
Main components on the CAN4DISCO
CAN4DISCO bill of materials (BOM)
24 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SN65HVD230DR | SOIC127P600X175-8N | U1, U2 |
| 1 | STM32F4_Discovery_Header | stm32f4_discovery_header | J1 |
| 4 | Conn_01x04 | Pin_Header_Straight_1x04_Pitch2.54mm | J2, J3, J4, J7 |
| 2 | Conn_01x06 | Pin_Header_Straight_1x06_Pitch2.54mm | J5, J12 |
| 4 | Conn_01x02 | Pin_Header_Straight_1x02_Pitch2.54mm | J6, J8, J9, J10 |
| 1 | Conn_01x03 | Pin_Header_Straight_1x03_Pitch2.54mm | J11 |
| 2 | Conn_02x03_Odd_Even | CAN_Header | J13, J14 |
| 2 | JUMPER | Socket_Strip_Straight_1x02 | CAN1_TERM, CAN2_TERM |
| 6 | 120R | R_0805_HandSoldering | R1, R2, R3, R4, R5, R6 |
CAN4DISCO design files
The KiCad project lives in the DistRap/distrap-hw repository on GitHub; these links point at the commit this page was built from.
CAN4DISCO: common questions
What microcontroller does the CAN4DISCO use?
The CAN4DISCO is built around the STM32F4_Discovery_Header, from the STM32 family.
How big is the CAN4DISCO PCB?
The CAN4DISCO measures 90 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CAN4DISCO?
24 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the CAN4DISCO design files?
From the DistRap/distrap-hw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the CAN4DISCO design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the CAN4DISCO without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in distrap-hw
Devboard
100 × 100 mm54 parts2LCustom license4
STM32Swdprog
60 × 22 mm40 parts2LCustom license4
STM32Stmstamp
50 × 50 mm39 parts2LCustom license4
Stmstepper
78.7 × 88.9 mm23 parts2LCustom license4
Module template
50 × 50 mm4 parts2LCustom license4
Encbreakout
50 × 50 mm3 parts2LCustom license4
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32Type g
google
169 × 30 mm24 parts2LApache-2.02.9k
STM32Main panel
234 × 84 mm26 parts4LApache-2.02.9k
STM32Base
52.3 × 52.3 mm36 parts2LApache-2.02.9k
STM32Type a
150 × 30 mm14 parts2LApache-2.02.9k
STM32Type c
188 × 30 mm17 parts2LApache-2.02.9k